Nabertherm SAL 30/.. - SAL 120/..
Nabertherm ·Made in Germany · In Active Production

Nabertherm SAL 30/.. - SAL 120/..

Nabertherm SAL 30/.. - SAL 120/.. — Processes Under Protective.

The SAL 30/.. - SAL 120/.. is a charging aid (Beschickungshilfe) for Nabertherm protective-atmosphere furnaces, not a furnace itself. It is a 2400 mm tall manual loading device that positions workpieces into the furnace chamber without breaking the gas seal. It serves as the interface between the operator and the hot zone in processes under protective gas.

Full specifications

Dimensions, Weight & Mechanical Design
Total height in mm mfr 2400

Description

Construction and positioning

Behavior and use

Installation and operation

Integration & Operating Notes

Process Limits
Use only with compatible SAL furnace sizes

The model code covers SAL 30/.. through SAL 120/.. furnaces. Confirm that the charging aid matches the specific furnace chamber dimensions and loading opening; using it with an unmatched furnace size may prevent proper positioning and compromise the protective-gas seal.

Factory Specification Sheet
Maintenance
Inspect mechanical parts for wear before each campaign

No maintenance schedule is provided in the available documents. As a mechanical handling device, check guides, joints, and contact surfaces for wear and alignment before each production campaign to avoid damage to the furnace chamber or seal.

Factory Specification Sheet

Selection & Integration Q&A

When should I choose this charging aid instead of a different SAL model?

Choose the variant whose code range covers your furnace size (SAL 30/.. to SAL 120/..). The aid must match the furnace chamber and loading opening; a mismatched size will not position workpieces correctly and may disturb the protective-gas seal.

What adjacent system parts must be compatible with this charging aid?

The charging aid interfaces mechanically with the SAL furnace loading opening. No electrical, gas, or control connections are specified for the aid itself. Confirm the furnace's protective-gas supply and controller (e.g., series 500) are independent of the aid.

What maintenance and accessories are required but not included?

No maintenance schedule or included accessories are listed. The charging aid is a mechanical device; inspect for wear before each campaign. Any gloves, tongs, or workpiece fixtures for loading are not part of the base delivery and must be sourced separately.

Dimensional Drawings & Technical Documentation

Technical documentation

PDF
Prozesssteuerung englisch
Brochure ·2,8 МБ ·20 pp.
View PDF
PDF
Fiber optics glass english 0
Brochure ·10,3 МБ ·97 pp.
View PDF
PDF
Foundry english
Brochure ·4,2 МБ ·52 pp.
View PDF
PDF
Dental english
Brochure ·13,1 МБ ·72 pp.
View PDF