Nabertherm TR 1050
Nabertherm TR 1050 — Heating Cabinets Chamber Ovens.
The TR 1050 is a 1050-litre electrically heated chamber oven rated to 300 °C, powered by a 10.1 kW three-phase connection and supporting loads up to 250 kg. Within the TR series it is the largest chamber volume, distinguished by a 1200 × 690 × 1400 mm interior and 13 grid positions. It serves as a batch heating cabinet for processes requiring uniform temperature up to 300 °C.
Full specifications
| Chamber volume | 1050 l |
| Chamber volume | 1050 l |
| Electrical connection | 3-phase |
| Electrical connection | 3-phase |
| Load capacity | 250 kilogram |
| Load capacity | 250 kilogram |
| Nominal power | 10.1 kW |
| Minutes mfr | 60 |
| Grids mfr | 13 |
| Inner dimensions (W × D × H) mfr | 1200 × 690 × 1400 mm |
| Outer dimensions (W × D × H) mfr | 1470 × 1040 × 1940 mm |
| Weight | 370 kg |
| Weight | 370 kg |
| Max temperature | 300 °C |
| Max temperature | 300 °C |
Description
Construction and series positioning
The TR 1050 is the largest chamber-volume model in the Nabertherm TR series, offering 1050 litres against the smaller TR 240 and TR 450 siblings. Its interior measures 1200 mm wide × 690 mm deep × 1400 mm high, with 13 grid positions and four grids supplied. The outer envelope is 1470 × 1040 × 1940 mm and the unit weighs 370 kg. Heating is electrical with a nominal power of 10.1 kW on a three-phase supply, and the chamber is rated for a maximum temperature of 300 °C. The load capacity is 250 kg, making it suitable for dense batch loads.
Behaviour under load and media
No digitized curve points are available for this model, so performance gradients cannot be quantified from the supplied facts. The 300 °C ceiling places the TR 1050 in the lower-temperature range of the Nabertherm oven portfolio; the fiber-optics catalog section lists TR ovens up to 300 °C, while chamber ovens KTR reach 260 °C and forced-convection chamber furnaces NAT/NA reach 900 °C. The 250 kg load rating and 1050-litre volume indicate that the oven is intended for bulky or heavy batches rather than small high-temperature samples. The 60-minute value appears in the extra specifications without a clear parameter label; it is not interpreted here as a heating or cooling rate.
Installation, control and operation
The supplied document digests do not contain model-specific installation or control details for the TR 1050. The controller document covers the Nabertherm 500 series and MyNabertherm app, including process data storage and temperature uniformity instrumentation types, but does not print furnace model sizes or ordering codes. No wiring diagrams, clearances, or commissioning steps for the TR 1050 are present in the verified facts. The three-phase electrical connection and 10.1 kW nominal power are the only electrical data available; no voltage or current values are stated.
Integration & Operating Notes
The chamber is rated to 300 °C. Exceeding this ceiling risks damage to the heating elements, insulation, and door seals, and may invalidate any temperature-uniformity assumptions. Process recipes and controller setpoints must be limited to 300 °C or below.
The maximum load is 250 kg. This limit applies to the total batch weight placed on the chamber floor or grids. Exceeding it can deform the support structure and affect temperature distribution. Load planning should account for fixtures and racks in addition to the workpiece.
Selection & Integration Q&A
Choose the TR 1050 when the batch requires the full 1050-litre chamber or a 250 kg load; its 1200 × 690 × 1400 mm interior and 13 grid positions suit bulky or heavy charges. The TR 240 and TR 450 offer smaller chambers for lighter or smaller batches, but their exact capacities are not given in the verified facts.
The oven requires a three-phase supply for its 10.1 kW nominal power. The verified facts do not state voltage or current, so the nameplate or factory wiring diagram must be consulted to size the feeder, breaker, and disconnect. No controller or cable is included in the base delivery per the available facts.
The base delivery includes four grids; additional grids or fixtures are not specified. Controller options such as the 500 series or MyNabertherm app are described in a separate document and are not confirmed as included. No service intervals or consumables are listed in the verified facts, so the maintenance schedule must come from the furnace manual.