Nabertherm VL 01/12 LB
Nabertherm ·Made in Germany · In Active Production

Nabertherm VL 01/12 LB

Nabertherm VL 01/12 LB — Dental firing & pressing furnaces.

The VL 01/12 LB is a single-phase vacuum firing furnace with a 70 mm work space and 1200 °C maximum temperature, built for dental ceramic firing. Its 1.8 kW nominal power and 10-minute heating time distinguish it within the series as a compact, fast-ramp unit. It integrates into dental labs as a standalone programmable station controlled by the D580 controller.

Full specifications

Core Performance & Functional Specifications
Electrical connection 1-phase
Nominal power 1.8 kW
Work space dimensionsin mm mfr 70
Work space dimensionsin mm mfr 70
Heating time mfr 10 min
Outer dimensions (W × D × H) mfr 360 × 605 mm
Dimensions, Weight & Mechanical Design
Weight 22 kg
Electrical, Power & Drive Specifications
Charging areain mm mfr 70
Operating Conditions, Environment & Protection
Max temperature 1200 °C

Description

Construction and series positioning

Thermal and electrical behavior

Control and operation

Integration & Operating Notes

Electrical
Single-phase supply must be sized for 1.8 kW nominal

The furnace is a 1-phase unit rated 1.8 kW; the branch circuit and protective device must be selected for this load. No voltage or current value is stated in the verified facts, so the actual supply voltage must be confirmed before installation.

Factory Specification Sheet
Control & I/O
D580 controller adds Wi-Fi and app-based process access

The controller digest identifies the D580 as Wi-Fi-capable and compatible with the MyNabertherm App for vacuum firing and vacuum pressing furnaces in dental ceramics. Network availability and app pairing should be planned if remote process monitoring is required.

Controller D580, document digest
Process Limits
Work space and charging area are limited to 70 mm

Both the work space dimensions and the charging area are 70 mm, so dental ceramic parts and any firing trays must fit within this envelope. Oversized charges will not seat on the lifting table and can disturb the firing position.

Factory Specification Sheet
Process Limits
1200 °C maximum must not be exceeded in firing programs

The maximum temperature is 1200 °C. Firing programs for dental ceramics must be written so that setpoints and any overshoot remain at or below this limit; no separate safety-temperature margin is stated in the verified facts.

Factory Specification Sheet
Maintenance
No maintenance interval is defined in the verified documents

The attached document digests contain no service schedule, error-code list, or consumable replacement interval for this furnace. Maintenance planning must therefore be based on the separate operating manual, which is not part of the verified facts.

Document digests (no maintenance section present

Selection & Integration Q&A

When should I choose the VL 01/12 LB rather than another model in the series?

Choose it when the firing chamber must fit within a 70 mm work space and charging area and the process stays at or below 1200 °C. No sibling models are listed in the verified facts, so a direct comparison with other series members cannot be made from this data.

What supply and controller infrastructure does the furnace require?

It is a 1-phase, 1.8 kW unit; the exact voltage and current are not stated in the verified facts and must be confirmed before wiring. Control is via the D580 controller, which is Wi-Fi-capable and works with the MyNabertherm App.

What maintenance and accessories are defined for the VL 01/12 LB?

The verified document digests contain no maintenance schedule, error codes, or accessory list for this model. Cables, firing trays, and consumables are therefore not confirmed as included or excluded; the separate operating manual must be consulted.

Dimensional Drawings & Technical Documentation

Technical documentation

PDF
Prozesssteuerung englisch
Brochure ·2,8 МБ ·20 pp.
View PDF
PDF
Fiber optics glass english 0
Brochure ·10,3 МБ ·97 pp.
View PDF
PDF
Foundry english
Brochure ·4,2 МБ ·52 pp.
View PDF
PDF
Controllerd580 eng
Brochure ·824,5 КБ ·1 pp.
View PDF