Nabertherm VL 01/12 LB Press
Nabertherm VL 01/12 LB Press — Dental firing & pressing furnaces.
The VL 01/12 LB Press is a single-phase vacuum pressing furnace with a 70 mm work space and 1200 °C maximum temperature, built for firing and pressing dental ceramic restorations. Its 1.8 kW rating and 10-minute heating time distinguish it as a compact dental-specific modification. It integrates into dental laboratory workflows via the D580 controller with Wi-Fi and MyNabertherm app support.
Full specifications
| Electrical connection | 1-phase |
| Nominal power | 1.8 kW |
| Work space dimensionsin mm mfr | 70 |
| Work space dimensionsin mm mfr | 70 |
| Heating time mfr | 10 min |
| Outer dimensions (W × D × H) mfr | 450 × 745 mm |
| Weight | 27 kg |
| Charging areain mm mfr | 70 |
| Max temperature | 1200 °C |
Description
Construction and series positioning
- The VL 01/12 LB Press is a dedicated dental ceramics furnace with a 70 mm work space (work space dimensions and charging area both 70 mm) and a maximum temperature of 1200 °C.
- It is a single-phase unit rated 1.8 kW, with a weight of 27 kg and outer dimensions of 450 × 745 mm (W × D).
- No sibling models are listed in the verified facts; the model code itself indicates the VL 01/12 platform with LB Press configuration for pressing.
Thermal behavior and process capability
- The furnace reaches working temperature with a stated heating time of 10 minutes; no curve points are available to characterize ramp or load behavior.
- The 1200 °C ceiling covers dental ceramic firing and pressing cycles; the 70 mm work space defines the batch envelope for restorations.
Control and operation
- The D580 controller is specified for vacuum firing and vacuum pressing furnaces in dental ceramics, and is Wi-Fi-capable with MyNabertherm app compatibility.
- The controller documentation covers process data storage and temperature uniformity instrumentation types, but no furnace-specific wiring or sequencing details are provided in the digests.
Integration & Operating Notes
The D580 controller is the specified control platform for this dental vacuum pressing furnace; it supports Wi-Fi and the MyNabertherm app, so network coverage and app-based process monitoring should be planned at installation.
The furnace is rated to a maximum of 1200 °C; operating above this limit risks damage to the heating elements and insulation. Process recipes for dental ceramics must be validated against this ceiling before use.
At 27 kg and 450 × 745 mm footprint, the furnace requires a level, heat-resistant bench capable of carrying the load; the lifting-table design means clearance above and around the chamber must be kept free for loading.
Selection & Integration Q&A
Choose this model when the workflow is dental ceramic firing and pressing with a 70 mm work space and 1200 °C ceiling. No sibling models are listed in the verified facts, so compare against other Nabertherm dental furnaces by work-space size and pressing capability.
The specified controller is the D580, which is Wi-Fi-capable and works with the MyNabertherm app. Plan network access for app monitoring; no external drive or power-supply accessories are listed in the verified facts, so confirm the factory-supplied package before ordering.
The verified facts list no maintenance schedule, spare parts, or consumables; the D580 controller documentation covers process data storage but not service intervals. Confirm heating-element and thermocouple spares and any pressing consumables with the supplier, as they are not stated as included.