Nabertherm W 7500
Nabertherm W 7500 — Radiation Heating.
The W 7500 is a bogie hearth furnace with a 7500 l chamber (1000 × 5400 × 1400 mm) and wire heating for a maximum temperature of 1280 °C. It is the mid-size, non-H variant in the W series, positioned between the W 5000 and the higher-capacity W 7500/H. It is intended for batch heat treatment of large, heavy loads that are charged on a rail-mounted bogie.
Full specifications
| Chamber volume | 7500 l |
| Chamber volume | 7500 l |
| Electrical connection | 3-phase |
| Electrical connection | 3-phase |
| Heating power | 235 watt |
| Heating power | 235 watt |
| Inner dimensions (W × D × H) mfr | 1000 × 5400 × 1400 mm |
| Outer dimensions (W × D × H) mfr | 1670 × 6190 × 2520 mm |
| Weight | 10300 kg |
| Weight | 10300 kg |
| Max temperature | 1280 °C |
| Max temperature | 1280 °C |
Description
Construction and series positioning
- The W 7500 is a bogie hearth furnace: the load sits on a wheeled hearth that travels out of the fixed chamber for loading and unloading. The chamber measures 1000 mm wide × 5400 mm deep × 1400 mm high, giving 7500 l of usable volume.
- Within the W series, the W 7500 is the mid-size model. The W 5000 and W 5000/H are shorter (5000 l class), while the W 7500/H shares this model's chamber volume but is the H modification. The H suffix is not defined in the supplied facts; no behavioral difference between W 7500 and W 7500/H can be stated here.
- Heating is by wire elements, which limits the maximum chamber temperature to 1280 °C. The series is described as wire-heated up to 1400 °C, so this model's 1280 °C ceiling is below the series maximum.
- The furnace is a heavy static installation: 10300 kg, with outer dimensions of 1670 × 6190 × 2520 mm. The depth of 6190 mm includes the hearth travel and must be allowed for in the building layout.
Behavior under load
- No digitized curve points were supplied for this model, so heat-up rate, cooling behavior and temperature uniformity cannot be quantified here. The only thermal fact is the 1280 °C maximum temperature.
- The electrical data as supplied are contradictory: the matched spec lists a heating power of '235 watt' for a 7500 l furnace at 1280 °C, which is not physically consistent with the chamber size. This value is therefore omitted rather than reconciled. The connection is stated only as 3-phase; voltage and current are not given in the verified facts.
- Because the hearth is a separate moving mass, the load should be treated as a batch that is charged cold or hot onto the bogie outside the chamber; the furnace is not a continuous conveyor.
Control and operation
- The attached document digests do not cover the W series. The controller document describes Nabertherm's standard controller series 500 and the MyNabertherm app, including process-data storage and AMS2750F instrumentation types, but it does not state which controller is fitted to the W 7500.
- No installation, connection or operating instructions specific to this model were supplied. The integration notes below are therefore limited to what the verified facts support.
Integration & Operating Notes
The outer depth of 6190 mm includes the bogie travel path; the chamber alone is 5400 mm deep. The foundation must carry a 10300 kg furnace plus the load on the bogie, and the building must allow the hearth to be withdrawn for charging. Verify floor loading and clear access before siting.
The verified facts state only a 3-phase connection. The listed heating power of 235 W is inconsistent with a 7500 l furnace and is not used. Obtain the nameplate rating and required supply voltage and current from the factory before sizing the feeder and protection.
The wire heating elements set a maximum temperature of 1280 °C for this model, below the 1400 °C series ceiling. Process recipes and over-temperature protection must be set so that the chamber never exceeds 1280 °C; doing so risks element and insulation damage.
Selection & Integration Q&A
Choose the W 7500 when you need a 7500 l chamber (1000 × 5400 × 1400 mm) at up to 1280 °C with wire heating. The W 5000 and W 5000/H are the smaller 5000 l class. The W 7500/H has the same 7500 l volume but is the H modification; the supplied facts do not define what the H changes, so confirm the difference with the factory before deciding between W 7500 and W 7500/H.
The verified facts state a 3-phase connection only. The listed heating power of 235 W is inconsistent with a 7500 l furnace and is not usable for sizing. Request the nameplate voltage, current and power from the factory, then size the feeder, disconnect and overcurrent protection to that nameplate data.
The furnace weighs 10300 kg and measures 1670 × 6190 × 2520 mm overall, with a 5400 mm deep chamber. The floor must carry the furnace plus the load on the bogie, and the building must provide the 6190 mm depth plus clearance for withdrawing and loading the hearth. No installation instructions specific to this model were supplied.
The supplied facts list no accessories, cables, controllers or consumables as included. The controller document describes series 500 controllers and MyNabertherm as available options but does not confirm what is fitted to the W 7500. Confirm the scope of delivery, controller, thermocouples and any recorder with the factory before ordering.