Shimadzu Animal Balances
Shimadzu ·Made in Japan · In Active Production

Shimadzu Animal Balances

Shimadzu Animal Balances — Laboratory balances.

The Shimadzu Animal Balances are a specialized category of laboratory balances designed for weighing live animals, typically featuring a draft shield or cage and anti-vibration measures. This model is distinguished within the Shimadzu line by its dedicated configuration for animal weighing, prioritizing stability and containment over standard analytical performance. It serves as the primary mass measurement instrument in vivarium and animal research workflows, where live subject mass is a critical experimental variable.

Full specifications

Description

Construction and Positioning

Behavior Under Load

Installation and Operation

Integration & Operating Notes

Mounting
Place on a rigid, level bench away from drafts

Animal activity and room air currents can disturb weighing; locate the balance on a vibration-isolated bench, close doors and avoid HVAC vents to maintain repeatability.

General laboratory balance installation practice
Process Limits
Live animals must be contained within the enclosure

The animal enclosure or draft shield must be used to prevent subjects from leaving the pan and to reduce air currents; ensure the enclosure is compatible with the animal size and does not contact the pan edges.

Animal balance operating principle
Maintenance
Clean enclosure and pan after each session

Residues from animals or bedding can affect accuracy; remove the enclosure and pan for cleaning according to the manual, and avoid solvents that may damage surfaces.

Laboratory balance cleaning guidelines

Selection & Integration Q&A

When should I choose the Animal Balances category over a standard analytical balance for live animal weighing?

Choose animal balances when weighing live, moving subjects: they offer enclosures to contain animals and filtering to stabilize readings. Standard analytical balances lack these features and may be unsuitable for dynamic loads.

What are the requirements for connecting this balance to a data system or printer?

Connection requirements depend on the specific model's interfaces; typically RS-232C or USB is available. Verify the interface type and cable pinout in the manual before connecting to a PC or printer.

What environmental conditions must be maintained for accurate animal weighing?

Operate in a stable room with minimal temperature fluctuation, away from drafts and vibrations. Avoid direct sunlight and strong air currents; allow the balance to acclimate after moving.

What maintenance and accessories are needed beyond the base delivery?

Regular cleaning of the animal enclosure and pan is required. Calibration weights and replacement enclosures may be needed; check the manual for approved accessories and service intervals.

Dimensional Drawings & Technical Documentation

Technical documentation