Shimadzu
·Made in Japan
·
In Active Production
Shimadzu Imlayer Aero
Shimadzu Imlayer Aero — Life science instruments.
The Shimadzu Imlayer Aero is a laboratory life-science instrument for automated sample preparation by layering. It is intended as a benchtop unit within a sample-preparation workflow, not as a stand-alone analytical detector.
Full specifications
Core Performance & Functional Specifications
| Sample-to-nozzle distance mfr | 5 to 10 cm |
| Spatial resolution (two-step vapor deposition) mfr | 5 to 10 μm (two-step vapor deposition) |
| Solution delivery volume (Step 2: iMLayer AERO spray method) mfr | 120 μL/min (Step 2: iMLayer AERO spray method) |
| Film thickness (Step 1: iMLayer vapor deposition) mfr | 1 μm (Step 1: iMLayer vapor deposition) |
| Matrix (hand spray comparison) mfr | 9-AA (hand spray comparison) |
| Volume used (hand spray comparison) mfr | 200 μL (hand spray comparison) |
Description
Construction and positioning
- The model is listed under Metrology, Analytical & Laboratory Instrumentation > Laboratory Equipment & Instruments > Life science instruments. ### Behavior under load and in operation
- No digitized curve points, performance ranges, or mode descriptions were supplied. - Do not assume flow, pressure, temperature, or duty-cycle behavior from the model name; request the factory specification sheet before sizing any upstream or downstream component. - Integration must be planned only after receiving the instruction manual; the notes below are therefore generic engineering cautions, not model-specific directives.
Selection & Integration Q&A
What must be confirmed about adjacent equipment such as controllers or power supplies before integration?
The control interface, supply voltage, and I/O signals are undocumented here. Obtain the manual to confirm whether a PC, external controller, or dedicated supply is required, and size any upstream component to the confirmed rating.
What maintenance and accessories are needed, and what is not included in base delivery?
No maintenance schedule, consumable list, or cable/accessory scope was provided. Confirm with the vendor which cables, reagents, and service parts are supplied and which must be ordered separately before commissioning.
Dimensional Drawings & Technical Documentation
Technical documentation
PDF
c146-e414
Datasheet
·616,3 КБ
·4 pp.