Shimadzu Kratos Nova
Shimadzu Kratos Nova — Spectrometers.
The Kratos Nova is a fully automated imaging X-ray photoelectron spectrometer (XPS) configured with up to three 110 mm diameter sample platens and electron-only charge neutralisation. It delivers large-area spectroscopy over a 700 x 300 µm analysis area and parallel imaging with fields of view of ca. 950 x 950 µm, 425 x 425 µm and 220 x 220 µm. It is intended for spatially resolved surface chemical analysis of both conducting and insulating specimens in a multi-sample laboratory workflow.
Full specifications
| Maximum sample thickness (deep sample platen) mfr | 19 mm (deep sample platen) |
| Platen storage capacity (SEC storage elevator) mfr | up to three platens (SEC storage elevator) |
| Platen elevator mfr | 45 mm |
| XPS parallel imaging mfr | 950 x |
| Performance on insulators mfr | The AXIS Nova has an electron only charge neutra |
| Sample handling mfr | 110 mm |
| Ion source mfr | 4 monatomic |
| Excitation source (standard) mfr | Al Ka (standard) |
| Information depth (standard Al Ka excitation source) mfr | upper most 10 nm (standard Al Ka excitation source) |
Description
Construction and positioning
- The Kratos Nova is an imaging XPS platform distinguished within its series by a fully automated sample handling system that accepts up to three 110 mm diameter platens simultaneously. - Charge compensation is provided by an electron-only neutralisation system, confirmed on the standard polymer polyethylene terephthalate (PET); no other neutralisation variant is described in the supplied facts. - The instrument is supplied with either a Minibeam 4 monatomic Ar+ ion source or a Minibeam 6 multi-mode Gas Cluster Ion Source (GCIS) for sample cleaning and sputter depth profiling. ### Analytical behaviour
- Spectroscopic performance is specified as counts per second at a stated FWHM for the Ag 3d 5/2 component, with the large 700 x 300 µm analysis area defining the spectroscopy mode. - Parallel imaging provides three discrete fields of view (ca. 950 x 950 µm, 425 x 425 µm and 220 x 220 µm), allowing the operator to trade field size against spatial resolution. - Because neutralisation is electron-only, insulating samples such as PET are handled by that mechanism; the supplied facts do not define performance for other charge-compensation strategies.
Integration & Operating Notes
The automated sample-introduction system is built around 110 mm diameter platens, and up to three can be loaded at one time. Specimens or sample holders must be mounted to suit this platen format; the supplied facts give no alternative carrier size, so mounting hardware should be planned around the 110 mm platen.
Sample cleaning and sputter depth profiling depend on which ion source is fitted: the Minibeam 4 monatomic Ar+ source or the Minibeam 6 multi-mode Gas Cluster Ion Source (GCIS). The required source must be specified with the instrument; the supplied facts do not state that both are present simultaneously.
Selection & Integration Q&A
The automated introduction system accepts 110 mm diameter platens, up to three at a time. Preparation and mounting fixtures should therefore be sized for 110 mm platens; no other carrier format is described in the supplied facts.
No maintenance intervals, consumables, cables or accessories are defined in the supplied documents. The ion source (Minibeam 4 or Minibeam 6 GCIS) must be specified as part of the configuration; service items should be confirmed with Shimadzu directly.