Shimadzu Nexera MX
Shimadzu Nexera MX — Chromatographs.
The Nexera MX is a dual-stream UHPLC system that uses MX-DST technology to double sample throughput and halve analysis time compared to conventional single-stream LC. With an SIL-40 autosampler, it achieves analysis cycle times under 10 seconds, making it suited for high-throughput LC/MS assays where sample capacity and speed are critical.
Direct drop-in replacements
Full specifications
| Analysis cycle time mfr | Less Than 10 Seconds (Autosampler SIL-40 Series) |
| Sample throughput mfr | twice the number of samples (Nexera MX Dual Stream Technology (MX-DST)) |
| Analysis time reduction mfr | in half (Nexera MX Dual Stream Technology (MX-DST)) |
Description
Construction and positioning
- The Nexera MX is built around Dual Stream Technology (MX-DST), which runs two independent flow paths in parallel to process samples simultaneously.
- This modification is distinguished from standard single-stream Nexera models by its ability to double sample throughput and reduce analysis time by half, as stated in the factory specifications.
- It integrates a Shimadzu SIL-40 series autosampler, which enables analysis cycle times of less than 10 seconds.
Behavior under load
- The system is designed for high-throughput LC/MS assays, where rapid injection cycles and low carryover are essential.
- According to the white paper (C190-E283), key UHPLC characteristics such as injection speed and sample capacity are optimized for multiplex configurations, supporting the dual-stream operation.
- No digitized curve points are available; performance is defined by the throughput and cycle time specifications.
Installation and operation
- The system operates with LabSolutions Connect and LabSolutions Insight software for control and data analysis, as noted in the product brochure (c190-e190).
- No specific installation, connection, or control details are provided in the available documents; refer to the instruction manual for electrical and interface requirements.
Integration & Operating Notes
The Nexera MX is controlled via LabSolutions Connect and LabSolutions Insight software, which manage the dual-stream operation and data acquisition. Ensure compatible software versions and appropriate PC hardware are available before installation.
To achieve the stated doubling of sample throughput, both streams must be loaded and operated in a coordinated manner. Unbalanced or single-stream use may negate the throughput advantage and is not representative of the specified performance.
Selection & Integration Q&A
Choose the MX when maximum sample throughput and minimal analysis time are critical, such as in high-throughput LC/MS assays. For lower sample volumes or methods not requiring parallel processing, a single-stream model may suffice and reduce complexity.
The MX requires LabSolutions Connect and Insight software for control and data handling. Ensure the MS detector is compatible with the dual-stream effluent flow and that the software version supports MX-DST. Consult the manual for electrical and interface specifications.
The base delivery typically includes the main unit and software licenses, but consumables such as columns, solvents, sample vials, and replacement parts for the autosampler are not included. Refer to the instruction manual for the maintenance schedule and recommended spare parts.