No photo available yet

Shimadzu ·Made in Japan · In Active Production

Shimadzu SPM-Nanoa

Shimadzu SPM-Nanoa — Microscopes.

The SPM Nanoa is a scanning probe microscope (SPM) with a standard 10 µm × 10 µm × 1 µm scanner and an optional 125 µm × 125 µm × 7 µm scanner, accommodating samples up to ø50 mm × 8 mm. It integrates an optical microscope with 220–1300× total magnification for probe positioning. The system is intended for nanoscale topography and property mapping in laboratory metrology and analytical workflows.

Full specifications

Description

Construction and positioning

Integration & Operating Notes

Process Limits
Sample size and thickness must not exceed stage limits

The sample stage accepts a maximum sample size of ø50 mm × 8 mm. Exceeding these dimensions may prevent proper mounting or cause collision with the probe. For 50 mm diameter samples, only the central area can be observed, so plan measurements accordingly.

Factory Specification Sheet
Control & I/O
Optical magnification depends on monitor size

Total magnification of about 220 to 1300 times is specified when the image is displayed at maximum on a 21.5-inch monitor. Actual on-screen magnification will vary with monitor size and display settings, so use the optical image for navigation rather than calibrated measurement.

Factory Specification Sheet

Selection & Integration Q&A

When should I choose the SPM Nanoa with the standard scanner versus an optional scanner?

Choose the standard 10 µm × 10 µm × 1 µm scanner for routine small-area imaging. Select an optional scanner (30 µm × 30 µm × 5 µm, 55 µm × 55 µm × 13 µm, or 125 µm × 125 µm × 7 µm) when larger lateral or Z range is required; the 2.5 µm × 2.5 µm × 0.3 µm scanner suits high-resolution work.

Dimensional Drawings & Technical Documentation

Technical documentation