No photo available yet

Shimadzu ·Made in Japan · In Active Production

Shimadzu Tensile Testing System With Thermostatic Chamber

Shimadzu Tensile Testing System With Thermostatic Chamber — Testing machines.

The Shimadzu Tensile Testing System With Thermostatic Chamber integrates a 220×220×600 mm thermostatic enclosure with a tensile testing frame, enabling mechanical testing at controlled temperatures. Its water-cooled refrigeration and heater achieve setpoints within 40 minutes, with 1.5 °C uniformity. This modification is for applications requiring precise thermal conditioning during tensile tests, distinguishing it from standard frames without environmental control.

Full specifications

Description

Construction and Positioning

Integration & Operating Notes

Cooling & Media
Water-cooled refrigerator requires stable supply

The single water-cooled refrigerator demands a continuous water supply with adequate flow and temperature to dissipate heat during cooling cycles. Inadequate water quality or flow can reduce cooling efficiency and potentially damage the refrigeration system, so ensure compliance with Shimadzu's water specifications before installation.

Factory Specification Sheet
Electrical
Heater and refrigerator draw significant power

The heater and water-cooled refrigerator have substantial electrical demands; verify that the facility's power supply can handle the combined load without voltage drops. Dedicated circuits may be required to prevent interference with other equipment and to ensure stable operation of the thermal chamber.

Factory Specification Sheet
Maintenance
Regular water system maintenance is essential

The water-cooled refrigeration system requires periodic inspection of water quality, filter replacement, and cleaning of heat exchangers to prevent scale buildup and maintain cooling performance. Follow Shimadzu's recommended maintenance schedule, as neglect can lead to reduced cooling efficiency and potential system failure.

Factory Specification Sheet

Selection & Integration Q&A

When should I choose this thermostatic chamber model over a standard tensile testing frame?

Choose this model when tests require controlled temperatures up to 250 °C with 1.5 °C uniformity. Standard frames lack thermal control and are suitable only for ambient testing. This model is ideal for materials whose properties are temperature-dependent.

What are the water supply requirements for the cooling system?

The water-cooled refrigerator requires a continuous supply of clean water at a specified flow rate and temperature. Consult Shimadzu's installation manual for exact requirements; inadequate water quality or flow can impair cooling and damage the system.

What environmental conditions are required for operating this system?

The system should be installed in a location with stable ambient temperature, adequate ventilation, and protection from dust and vibrations. Ensure the water supply and electrical connections meet specifications. Avoid corrosive atmospheres.

What maintenance items and accessories are not included with the base system?

The base delivery includes the testing frame and chamber but may not include specimen grips, water filtration, or calibration certificates. Regular maintenance includes water filter replacement and heat exchanger cleaning. Consult Shimadzu for a complete list.

Dimensional Drawings & Technical Documentation

Technical documentation