No photo available yet
Shimadzu Tescan Amber X 2
Shimadzu Tescan Amber X 2 — Microscopes.
The Tescan Amber X 2 is a plasma FIB-SEM (PFIB) that combines a BrightBeam field-free UHR SEM column with a Mistral Xe+ plasma ion source for site-specific sample preparation and 3D tomography. It supports EDS, EBSD, and ToF-SIMS detectors and enables TEM lamella preparation via TEM AutoPrep Pro. The system is controlled by Tescan Essence software and is suited for multi-modal materials characterization in a single instrument.
Full specifications
Description
Construction and positioning
- The Amber X 2 integrates a BrightBeam field-free ultra-high-resolution SEM column with a Mistral plasma FIB column using xenon ions (Xe+). - This configuration is a PFIB-SEM, distinguishing it from conventional Ga-based FIB-SEM systems by the plasma ion source, which is typically chosen for larger volume milling and reduced implantation artifacts. ### Behavior and modes
- The instrument supports 3D tomography volumes up to 1 mm, indicating capability for serial sectioning over relatively large volumes. - Detector types include EDS, EBSD, and ToF-SIMS, enabling elemental, crystallographic, and chemical surface analysis within the same chamber. - TEM lamella preparation is automated via TEM AutoPrep Pro, streamlining the workflow from bulk sample to electron-transparent specimen. ### Installation and operation
- The system is operated through Tescan Essence software, which integrates control of the SEM, FIB, and detectors.
Integration & Operating Notes
High-resolution SEM and FIB columns are sensitive to mechanical vibration and electromagnetic interference; the installation site should be evaluated for floor vibration and stray fields, and the instrument may require a dedicated anti-vibration foundation or active isolation system as specified in the site preparation manual.
The system includes high-voltage supplies for the SEM and plasma FIB, and sensitive detectors; power quality should meet the manufacturer's specifications for voltage stability, harmonic distortion, and grounding to avoid image artifacts or equipment damage.
All acquisition and processing functions are controlled through Tescan Essence software, which coordinates the SEM and FIB columns, stage, and detectors; users should verify compatibility with existing data management and network infrastructure.
The Mistral plasma FIB uses xenon gas; the supply must be of high purity and delivered at the pressure and flow rate specified by the manufacturer to maintain stable plasma and prevent contamination of the ion column.
The SEM and FIB columns require periodic alignment, aperture cleaning, and detector calibration as outlined in the maintenance schedule; consumables such as apertures, filaments (if applicable), and gas filters should be stocked according to the recommended service intervals.
Selection & Integration Q&A
Choose the Amber X 2 when you need large-volume 3D tomography (up to 1 mm) or reduced ion implantation damage, thanks to its Xe+ plasma FIB. For ultra-high-resolution milling of small features, a Ga-FIB may be more suitable.
The system supports EDS for elemental analysis, EBSD for crystallography, and ToF-SIMS for surface chemistry, all within the same chamber, enabling multi-modal characterization without sample transfer.
The instrument requires a stable, vibration-isolated floor, low electromagnetic interference, and a high-purity xenon supply for the plasma FIB. Electrical power must meet voltage and grounding specifications to ensure stable operation.
Regular maintenance includes column alignment, aperture cleaning, and detector calibration. Consumables such as apertures, gas filters, and possibly filaments should be stocked per the manufacturer's schedule. Specific intervals are detailed in the maintenance manual.