Waters Aura CL System
Waters ·Made in USA · In Active Production

Waters Aura CL System

Waters Aura CL System — Laboratory automation & equipment.

The Aura CL System is an automated imaging particle analyzer combining 4x and 10x objectives with a 24.6 mm² imaging area and 1.0 pixel/µm resolution. It quantifies particles from >1 µm to <5 mm, delivering BMI results in 1 minute and FMM results in 30 seconds per sample. It is used for rapid, reproducible particle characterization in laboratory workflows.

Full specifications

Core Performance & Functional Specifications
Pipetting volume 5 µL
Imaging Area mfr 24.6 mm 2
Optics mfr 4x and 10 objectives
Resolution mfr 1.0 pixel/μm
Detectable size range mfr Range from >1 μm (ECD) to <5 mm (ECD)
BMI read time mfr 1 minute/sample
FMM read time mfr 30 seconds/sample
Software mfr Particle Vue 4.x all-in-one Software suite (imag

Description

Construction and positioning

The Aura CL System is a benchtop imaging particle analyzer built around a 4x and 10x objective turret and a 24.6 mm² imaging area. It operates as a standalone unit controlled by the Particle Vue 4.x software suite, which handles image capture and analysis. ### Measurement behavior

The system detects particles across a broad size range, from greater than 1 µm (ECD) up to less than 5 mm (ECD), using a resolution of 1.0 pixel/µm. Two read modes are supported: BMI (1 minute per sample) and FMM (30 seconds per sample). The 5 µL pipetting volume indicates that sample consumption is minimal, making the instrument suitable for workflows where sample material is limited.

Integration & Operating Notes

Control & I/O
Operation requires Particle Vue 4.x software suite

All image capture and analysis functions are performed through the Particle Vue 4.x all-in-one software. The system does not appear to have standalone controls, so a compatible computer with the software installed is necessary for operation. Verify software compatibility and licensing before integration.

Factory Specification Sheet
Maintenance
Regular cleaning of optics and imaging area is essential

The system uses 4x and 10x objectives and a 24.6 mm² imaging area. Dust, debris, or residue on optical surfaces can degrade image quality and affect particle detection accuracy. Establish a routine cleaning schedule according to the manufacturer's instructions to maintain performance.

Factory Specification Sheet

Dimensional Drawings & Technical Documentation

Technical documentation