Induztr
Engineering Digest Document Viewer Related Models

PowerPoint Presentation

Technical Reference Summary

Covered Models & Document Scope

This document is a conference poster (MSACL 2018, Poster #30A) comparing immunoassay and rapid LC-TOF-MS for presumptive drug screening in clinical research; it is not a product datasheet and covers no models, sizes, or ordering codes.

Technical Data

Parameter Value Condition
Column dimensions 2.1x50 mm p.1 ↗ Agilent Poroshell SB-C8, 2.7 µm
Column particle size 2.7 µm p.1 ↗ Agilent Poroshell SB-C8
Column temperature 75 °C p.1 ↗
Injection volume 2 µL p.1 ↗ Positive mode
Flow rate 1 mL/minute p.1 ↗ Positive and negative mode
Mobile phase A (positive mode) 5 mM ammonium formate, pH 3.5 p.1 ↗ Positive mode
Mobile phase B (positive mode) 0.1% formic acid in ACN p.1 ↗ Positive mode
Mobile phase A (negative mode) 0.1% acetic acid in water p.1 ↗ Negative mode
Gradient 5%-95% B in 1.25 minutes, 0.5 minute re-equilibration p.1 ↗ Positive mode
Gas temperature 250 °C p.1 ↗ Positive and negative mode
Drying gas flow 15 L/min p.1 ↗ Positive and negative mode
Nebulizer pressure 60 psig p.1 ↗ Positive and negative mode
Sheath gas temperature 400 °C p.1 ↗ Positive and negative mode
Sheath gas flow 12 L/min p.1 ↗ Positive and negative mode
Vcap 3500 V p.1 ↗ Positive and negative mode
Fragmentor 125 V p.1 ↗ Positive and negative mode
Scan speed 4 spectra/sec p.1 ↗ Positive and negative mode

Operating Limits

  • Creatinine inter- and intra-assay imprecision: <3% at two QC levels p.1 ↗
  • Carryover: 0.02% p.1 ↗
  • Creatinine comparison to Jaffe method slope: 0.91 p.1 ↗
  • Creatinine comparison to Jaffe method correlation coefficient: 0.96 p.1 ↗