No photo available yet
Agilent Technologies Cary 635 FTIR Spectrometer—Compact, Benchtop FTIR
Agilent Technologies Cary 635 FTIR Spectrometer—Compact, Benchtop FTIR — Molecular spectroscopy.
Benchtop FTIR spectrometer with a 25 mm optical aperture and interchangeable sampling modules, including single-reflection ZnSe and Ge ATR, multireflection ZnSe ATR, DialPath and TumblIR. The Cary 635 covers 5100–600 cm⁻¹ and accepts 20 µL sample volumes; its ATR path length is 2.6 µm with a 2.5 mm surface diameter. It is used for quantitative polymer additive analysis and blend-ratio determination in QA/QC laboratories.
Full specifications
| Wavelength range | 5100...600 |
| Atr Surface Diameter | 2.5 mm |
| Diamond Atr Active Area | 200 µm |
| Diamond Atr Sampling Surface Diameter | 1 mm |
| Dimensions | 16 centimeters |
| Effective Pathlength | 2.6 μm |
| Firmware Load Time | 15 seconds |
| Ge Atr Effective Pathlength | 0.15 µm |
| Optical Aperture | 25 mm |
| Sample volume | 20 µL |
| Warmup Period | 5 minutes |
| Znse Atr Active Area | 200 µm |
| Znse Atr Sampling Surface Diameter | 1 mm |
| Bench space required mfr | 20 cm |
| ATR spectral range mfr | 5100...600 |
| Analyzed additive concentration (Irganox 1010 in polyethylene) mfr | 0.16 wt% |
| Dimensions (main optical unit) mfr | 16 cm |
| Warmup period before reliable analysis mfr | 5 minutes |
| Warmup before performance validation tests mfr | 120 minutes |
| Energy (center-burst) diagnostic, optimal mfr | 28000 |
| Energy (center-burst) diagnostic, marginal mfr | 28000 |
| Energy (center-burst) diagnostic, critical mfr | 30000 |
| Laser signal diagnostic, optimal mfr | 15000 |
| Laser signal diagnostic, marginal mfr | 15000 |
| Laser signal diagnostic, critical mfr | 17000 |
| Diamond ATR window thickness mfr | 0.5 mm |
| ZnSe ATR window thickness mfr | 0.5 mm |
| Germanium ATR effective pathlength at 1,700 cm-1 mfr | 0.36 μm |
| Germanium ATR effective pathlength at 600 cm-1 mfr | 1.02 μm |
| Performance test resolution mfr | 4 |
| Performance test collection time mfr | one minute minute |
| Performance test duration mfr | two minutes per test minutes minutes |
| Minimum number of performance tests mfr | 15 tests |
| Performance test spectral regions mfr | 2600 |
| Stability test spectral regions mfr | 3000 |
| Main optical unit dimensions mfr | 6.2 in |
| Validation warmup period mfr | 120 minutes |
| Energy (center-burst) optimal mfr | 28000 |
| Energy (center-burst) marginal mfr | 28000 |
| Energy (center-burst) critical mfr | 30000 |
| Laser signal optimal mfr | 15000 |
| Laser signal marginal mfr | 15000 |
| Laser signal critical mfr | 17000 |
| Unpacking mfr | 11 |
| Installation mfr | 12 |
| Components mfr | 13 |
| Connecting power mfr | 13 |
| Power cord selection mfr | 14 |
| MicroLab software mfr | 16 |
| Turning On the Instrument mfr | 16 |
| Turning Off mfr | 17 |
| Performance Verification mfr | 17 |
| G8043-67483 mfr | Replacement flat tip for ATR ATR |
| G8043-67484 mfr | Replacement pellet tip for ATR ATR |
| G8043-67405 mfr | Polystyrene film for ATR/Transmission sampling a |
| G8043-67406 mfr | Polystyrene film for TumblIR/DialPath sampling a |
| PIKE-162-5450 mfr | 38 μm |
| G8043-67400 mfr | Infrared source with purge fitting fitting |
| G8043-67401 mfr | Desiccant with purge fitting fitting |
| G8043-67402 mfr | KBr window with removal tool tool |
| G8043-67403 mfr | ZnSe window with removal tool tool |
| G8043-67003 mfr | Cary FTIR Swivel Diamond ATR Press Press |
| G8043-67004 mfr | Cary FTIR Swivel Ge-ZnSe Press Press |
| G8043-67012 mfr | Purge kit for engine and Transmission sampling a |
| G8043-67524 mfr | Cary FTIR Base Plate Rubber Bumper+Screw Screw |
| G8043-67407 mfr | 635 Supply |
| G8043-67408 mfr | 635 Cable |
| System OFF mfr | Red Red |
| System startup mfr | Red / green green |
| System ON mfr | Green Green |
| Firmware update mfr | Red / green green |
| Validation warmup mfr | 120 minutes |
| ATR window thickness mfr | 0.5 mm |
| Post-maintenance equilibration time mfr | 30 hours |
| Atr Path Length | 2.6 μm |
| Diamond Atr Depth Of Penetration | 2 µm |
| Weight | 3.8 kg |
| Source diagnostic, optimal mfr | 2.1 A |
| Source diagnostic, marginal mfr | 2.4 A |
| Source diagnostic, critical mfr | 2.7 A |
| Source current optimal mfr | 2.1 A |
| Source current marginal mfr | 2.4 A |
| Source current critical mfr | 2.7 A |
| ATR effective pH range mfr | 1...14 |
| ZnSe ATR pH range mfr | 5...9 |
| Environment mfr | 15 |
| Desiccant replacement humidity mfr | 30 |
Description
Construction and series positioning
The Cary 635 is a benchtop FTIR engine built around a 25 mm optical aperture and a modular sampling interface. Unlike the handheld 4200 FlexScan, 4300 and 4500 models, it is a laboratory instrument requiring 20 cm of bench space and weighing 3.8 kg. Within the Cary 635 line, the base engine is configured by selecting one of the interchangeable sampling modules: single-reflection ZnSe ATR, single-reflection Ge ATR, multireflection ZnSe ATR, DialPath, TumblIR, diffuse reflectance, 45° or 10° specular reflectance, or transmission.
Sampling behavior and media
- The ATR configuration provides a 2.6 µm effective path length, a 2.5 mm ATR surface diameter and a working pH range of 5–9; samples outside this pH window can attack the ZnSe or Ge crystal.
- The 20 µL sample volume is the minimum for reproducible spectra in the ATR and transmission modules.
- The spectral range of 5100–600 cm⁻¹ covers the fundamental and fingerprint regions used for polymer additive quantification; the application brochure reports determination of 0.16 wt% Irganox 1010 in polyethylene.
Installation and operation
Bench space of 20 cm is required. Sampling modules are exchanged at the instrument interface; no ordering codes or size variants are printed in the brochures. The application brochure pairs the Cary 635 with DialPath and TumblIR accessories and MicroLab software for PE/PP additive and copolymer blend-ratio analysis. No electrical, control or I/O specifications are given in the supplied documents.
Integration & Operating Notes
Samples outside the stated ATR effective pH range of 5 to 9 can chemically attack the ZnSe or Ge crystal, degrading the 2.6 µm path length and the 2.5 mm surface. Neutralize or dilute aggressive samples before measurement, or select a different sampling module.
The ATR and transmission modules require at least 20 µL to fully cover the 2.5 mm ATR surface. Underfilling produces poor contact and non-reproducible absorbance, especially for the 0.16 wt% additive-level measurements described in the application brochure.
Residue on the 2.5 mm ATR surface changes the effective path length and can scratch the ZnSe or Ge crystal. Clean the crystal with a solvent compatible with the pH 5–9 window after each sample set, and verify the background spectrum before quantitative runs.
Selection & Integration Q&A
Choose the Cary 635 when 20 µL sample volumes, a 25 mm aperture and interchangeable ATR/DialPath/TumblIR modules are needed for quantitative polymer additive analysis in a fixed laboratory. The handheld 4200/4300 models suit field identification where bench space and module exchange are not available.
The application brochure uses the Cary 635 with DialPath or TumblIR sampling accessories and MicroLab software. The base engine alone does not include these modules; they must be specified separately to reproduce the 0.16 wt% additive determination.
The base engine ships without sampling modules; ZnSe/Ge ATR, DialPath and TumblIR accessories and MicroLab software are separate items. Routine maintenance includes cleaning the 2.5 mm ATR crystal within the pH 5–9 window; no service interval is printed in the supplied brochures.