Agilent Technologies Cary Fluorescence Instrumentation
Agilent Technologies ·Made in USA · In Active Production

Agilent Technologies Cary Fluorescence Instrumentation

Agilent Technologies Cary Fluorescence Instrumentation — Molecular spectroscopy.

The Cary Eclipse is a benchtop fluorescence spectrophotometer with a 24-inch footprint, offering scan speeds to 24,000 nm/min and kinetics collection at 80 points/s. It supports fluorescence, phosphorescence, chemiluminescence and bioluminescence modes, with a red-sensitive PMT extended to 900 nm. It is used for trace-level molecular spectroscopy in analytical laboratories.

Full specifications

Core Performance & Functional Specifications
Kinetics Data Collection Rate 80 points/s
Minimum Reduced-volume Cuvette Volume 5 µL
Red-sensitive Photomultiplier Sensitivity Extension 900 nm
Scan speed 24000 nm/min
Typical Lamp Life 10 years
Wavelength range scan time mfr 3 s
Xenon flash lamp lifetime mfr 3 flashes
Dimensions, Weight & Mechanical Design
Bench footprint mfr 600 mm

Description

Construction and series positioning

Measurement behavior

Lamps and operation

Integration & Operating Notes

Process Limits
Red-sensitive PMT response is specified only to 900 nm

Emission wavelengths beyond the 900 nm extension of the red-sensitive photomultiplier are outside the stated sensitivity range; method development should keep emission collection within the documented range rather than assuming response at longer wavelengths.

Factory Specification Sheet
Process Limits
Reduced-volume cuvettes below 5 µL are outside the stated minimum

The minimum reduced-volume cuvette volume is 5 µL; sample cells smaller than this are not covered by the verified specification, so low-volume methods should be designed at or above this volume.

Factory Specification Sheet

Selection & Integration Q&A

When should I choose the Cary Eclipse fluorescence spectrophotometer instead of the handheld FTIR models in the same comparison list?

Choose the Cary Eclipse when the measurement is fluorescence, phosphorescence, chemiluminescence or bioluminescence, with scan speeds to 24,000 nm/min and kinetics at 80 points/s. The 4200/4300/4500/5500 siblings are FTIR instruments for infrared molecular spectroscopy, not fluorescence.

What sample-cell and detector-range requirements must adjacent system parts meet?

Reduced-volume cuvettes must hold at least 5 µL. Emission collection is specified to 900 nm via the red-sensitive PMT extension; methods requiring response beyond that are outside the stated range. No lamp, power or interface requirements are given in the supplied facts.

What maintenance schedule and accessories are defined for this model?

No maintenance schedule, service interval, cable or consumable list is present in the verified facts or the brochure digest. Lamp replacement cannot be scheduled because the two lamp-life fields conflict; confirm lamp type, spares and accessories with the supplier.

Dimensional Drawings & Technical Documentation

Technical documentation