No photo available yet
Agilent Technologies 4000 m3/h Rotary Piston (Roots) Pump; RP-4001 Roots Pump
Agilent Technologies 4000 m3/h Rotary Piston (Roots) Pump; RP-4001 Roots Pump — Vacuum technologies.
The RP-4001 is a 4000 m³/h rotary piston (Roots) vacuum pump, the largest capacity model in the RP series. It is intended for high-throughput roughing and backing duty in large vacuum systems, where its displacement exceeds that of the 1000, 1400, 500 and 250 m³/h siblings. No electrical, pressure or connection data for this model is present in the verified facts.
Full specifications
| Diffusion Pump Pumping Speed | 50 L/s |
| Vacuum gauge measurement range mfr | 6 pressure |
| Dry scroll pump typical size mfr | 3...30 h |
| Turbomolecular pump pumping speed mfr | 70...3 L/s |
| Turbomolecular pump controller protection class mfr | 54 |
Description
Construction and series positioning
- The RP-4001 is a rotary piston (Roots) pump with a nominal displacement of 4000 m³/h, the highest capacity in the RP series.
- Sibling models cover 1000 m³/h (RP-1001), 1400 m³/h (RP-1401), 500 m³/h (RP-501) and 250 m³/h (RP-251); the RP-4001 is selected when system gas load exceeds what those sizes can handle.
- No construction materials, flange sizes, shaft seals or motor data are given in the verified facts for this model.
Behavior and operating data
- No digitized curve points, pressure ranges or pumping-speed curves are available for the RP-4001; performance behavior under different inlet pressures cannot be stated from the supplied facts.
- The only matched spec is a diffusion-pump pumping speed of 50 L/s, which belongs to a diffusion pump, not to this Roots pump, and is therefore not used as an RP-4001 rating.
- Extra factory specs (vacuum gauge range 6, dry scroll pump size 3...30 h, turbomolecular pump speed 70...3 L/s, controller protection class 54) describe other product families and are not RP-4001 parameters.
Installation, control and operation
- The attached brochures are application-level e-mobility documents and contain no RP-4001 installation, connection, control or maintenance instructions.
- No manual digest provides mounting orientation, cooling-water requirements, oil specification, electrical supply or control interface details for this model.
- Integration specifics must therefore be obtained from the model-specific instruction manual, which is not part of the verified facts.
Integration & Operating Notes
The only matched performance spec in the verified facts is a 50 L/s diffusion-pump pumping speed, which belongs to a different pump type. Sizing the RP-4001 from that number would undersize the roughing line by orders of magnitude; use the model-specific datasheet for the 4000 m³/h displacement and its pressure dependence.
Verified facts give only nominal displacements for the RP family: 250, 500, 1000, 1400 and 4000 m³/h. Selection between the RP-4001 and its siblings can therefore be based only on required throughput; pressure, ultimate vacuum and power data for each size must be taken from the respective datasheets.
Selection & Integration Q&A
Choose the RP-4001 when the required roughing throughput approaches 4000 m³/h; the RP-1001 and RP-1401 cover 1000 and 1400 m³/h respectively. Verified facts give only nominal displacements, so pressure-dependent performance and motor data must be compared from each model's datasheet before final selection.
The verified facts contain no electrical or control data for the RP-4001; voltage, current, motor rating and control I/O are not stated. These must be taken from the model-specific instruction manual or datasheet, not inferred from the series or from the e-mobility brochures.
No mounting orientation, ambient temperature, cooling-water or duty-cycle limits for the RP-4001 appear in the supplied documents. The brochures are application-level and the spec sheet lists no environment data, so installation limits must be confirmed from the model-specific manual before site planning.
The verified facts list no maintenance intervals, consumables, cables or accessories for the RP-4001, and the brochures contain no ordering codes or part numbers. Base delivery content and required service items are therefore unknown from these documents and must be confirmed against the model-specific manual and price list.