Elmo Rietschle F-RB
Elmo Rietschle ·Made in Germany · In Active Production

Elmo Rietschle F-RB

Elmo Rietschle F-RB — Compressors & Blowers.

The F-RB is a 100% oil-less high-speed radial blower from Elmo Rietschle's F-Series, operating in vacuum or pressure/compression mode. It delivers suction capacity up to 3000 m³/h at vacuum or pressure up to 200 mbar, with shaft power up to 10 kW. Its oil-free design suits fuel cells, food packaging, centralised vacuum systems, water treatment, textiles and electronics.

Full specifications

Core Performance & Functional Specifications
Operating principle mfr 100% oil-less
Application mfr Fuel cells, food packaging, centralised vacuum s
Suction capacity mfr 0-3000 m3/h
Vacuum mfr 0-200 mbar
Pressure mfr 0-200 mbar
Country of manufacture mfr Germany
Application area mfr Vacuum and compression
Max suction capacity mfr 3000 m3/h
Max vacuum mfr 200 mbar
Max pressure mfr 200 mbar
Electrical, Power & Drive Specifications
Power consumption at shaft mfr 0-10 kW
Max power consumption at shaft mfr 10 kW

Description

Construction and positioning

Performance behaviour

Installation and operation

Integration & Operating Notes

Process Limits
Do not exceed 200 mbar in either vacuum or pressure mode

The maximum vacuum and maximum pressure are both 200 mbar. Operating beyond this limit risks mechanical damage or invalid process results, and the 0–3000 m³/h flow range must be evaluated together with the 200 mbar ceiling when selecting the duty point.

Factory Specification Sheet
Electrical
Size the drive for at least 10 kW shaft power

Power consumption at the shaft reaches 10 kW at the top of the range. The motor, variable-frequency drive and supply must be rated for this maximum continuous shaft power, and the operating frequency must be set to one of the published curve frequencies (167, 233, 300 or 367 Hz).

Factory Specification Sheet; HSRB_Brochure_Digital_EN.pdf
Control & I/O
Select the duty point from the correct frequency curve

Performance curves are published for 167 Hz, 233 Hz, 300 Hz and 367 Hz. Because the extra-spec fields list both 167 Hz and 367 Hz as operating frequencies, the engineer must confirm which curve applies to the intended speed and read flow and pressure from that curve rather than interpolating across the full range.

HSRB_Brochure_Digital_EN.pdf
Maintenance
No oil changes required in the gas path

The blower is 100% oil-less, so there is no lubricant to change or dispose of in the process gas path. Maintenance planning should focus on the bearings and drive system, but the verified documents do not specify service intervals, so the manufacturer's manual must be consulted for the actual schedule.

Factory Specification Sheet

Selection & Integration Q&A

When should I choose the F-RB instead of another variant in the F-Series?

No sibling models are listed in the verified data, so the F-RB is selected on its own envelope: 0–3000 m³/h, 200 mbar vacuum or pressure, and 10 kW shaft power. If your duty point falls outside these limits, a different series or size is required.

What drive and power supply must be matched to the F-RB?

The drive must deliver at least 10 kW at the shaft and operate at one of the published frequencies (167, 233, 300 or 367 Hz). The supply and VFD must be sized for the full 10 kW continuous shaft power, and the duty point read from the corresponding frequency curve.

What are the mounting and duty-cycle limits for the F-RB?

The verified documents do not specify mounting orientation, ambient temperature or duty-cycle limits. The unit is oil-less and rated for continuous vacuum or pressure up to 200 mbar, but installation and environment details must be taken from the full instruction manual.

What maintenance and accessories are required, and what is not included in base delivery?

The F-RB is oil-less, so no lubricant changes are needed in the gas path. The verified data does not list service intervals, spare parts, cables or controls, so these must be confirmed with the manufacturer; base delivery should be assumed to exclude drive, cabling and controls.

Dimensional Drawings & Technical Documentation

Technical documentation

PDF
HSRB Brochure Digital EN
Datasheet ·2,1 МБ ·7 pp.
View PDF