No photo available yet

Eppendorf ·Made in Germany · In Active Production

Eppendorf BioBLU ® c Single-Use Bioreactors

Eppendorf BioBLU ® c Single-Use Bioreactors — Bioreactors & fermenters.

The BioBLU c is the single-use stirred-tank bioreactor variant of Eppendorf's BioBLU line, offered as a pre-sterilized, disposable vessel with an integrated impeller assembly. It is positioned within a portfolio spanning 60 mL to 500 L working volume, alongside the f and Stem Cell impeller variants. It serves as the cultivation vessel in upstream bioprocess systems, replacing clean-in-place glass or stainless vessels.

Full specifications

Description

Construction and series positioning

Behavior and media

Control and operation

Integration & Operating Notes

Process Limits
Vessel performance data must be obtained before scale-up

No matched performance specifications or curve points were supplied for this model, so mass-transfer, mixing and power-input values needed for scale-up calculations are not available in this card and must be requested from the vessel documentation.

Factory Specification Sheet (not supplied
Maintenance
Disposable assembly is replaced, not cleaned, between runs

As a single-use vessel, the wetted flow path is discarded after the batch; the reusable hardware (drive, sensors, tubing connectors) is what carries the maintenance schedule, which is defined in the system manual rather than in the vessel documentation.

Fermentors Bioreactors Brochure Bioprocess Family

Selection & Integration Q&A

When should I choose the BioBLU c over the f or Stem Cell impeller variants?

The c variant is the standard impeller configuration; the f and Stem Cell versions differ in impeller geometry for specific shear-sensitive or stem-cell cultures. Selection depends on the shear tolerance of the cells, and no comparative performance data for this model was supplied.

What host system and connections does the BioBLU c require?

The vessel is controlled by an Eppendorf bioreactor system (BioFlo or DASGIP/DASbox class) running DASware or BioCommand software. Exact tubing, sensor and connector requirements are not in the supplied brochure digest and must be taken from the BioBLU c manual.

What is replaced between batches and what is not included in base delivery?

The disposable vessel and impeller assembly are consumed per batch; sensors, tubing, connectors and the drive/control hardware are separate items. The supplied brochure digest lists no included accessories, so the delivery scope must be confirmed on the quotation.

Dimensional Drawings & Technical Documentation

Technical documentation

PDF
Fermentors Bioreactors Brochure Bioprocess Family Lets bioprocess toge
Brochure ·14,7 МБ ·28 pp.
View PDF