Eppendorf BioFlo ® 120
Eppendorf BioFlo ® 120 — Bioreactors & fermenters.
Single-unit bioreactor controller for glass and single-use vessels, accepting autoclavable 1–10 L and BioBLU single-use vessels up to 50 L. It supports bacteria, yeast, fungi, insect, mammalian and stem-cell cultures with up to 20 SLPM gas flow and a 7-inch interface. It serves as the benchtop control hub for parallel-free, scalable bioprocess development.
Full specifications
| Bacteria/yeast/fungi | yes |
| Communication | 2 |
| Exhaust Condensation | Water-cooled or Electric heater band |
| Gas Supply | 1 |
| Insect | yes |
| Interchangeable Vessels | yes |
| Mammalian/animal | yes |
| Stem Cells | yes |
| Validatable | no |
| Vessels | Glass/single-use vessels |
| Number of parallel units mfr | Single unit |
| Dimensions (W × D × H) mfr | 24,7 × 55,9 × 62,9 cm / 9,7 × 22,0 × 24,8 in |
| Water supply mfr | Quick-connect; 10 psig (0.69 barg) |
| Max. gas flow rates mfr | 20 SLPM |
| Product Weight | 14.8 kg |
| Power supply mfr | 100 – 120/208 – 240 V ±10 %, 50/60 Hz |
| Power supply mfr | IEC-C14 (with regional plug types); 100 – 120/20 |
| User Interface | 7 |
Description
Construction and positioning
- The BioFlo 120 is a single-unit benchtop controller (14.8 kg, 24.7 × 55.9 × 62.9 cm) that drives interchangeable glass or single-use vessels; no sibling models are listed, so it stands as the sole controller in this series.
- Vessel compatibility spans autoclavable 1 L, 2 L, 5 L and 10 L glass vessels and BioBLU single-use bioreactors (1c/f, 3c/f, 5c, 5p, 10c, 14c, 50c), giving a working scale-up window from 250 mL to 40 L.
- Exhaust condensation is handled by either a water-cooled condenser or an electric heater band, selected per vessel configuration.
Behavior and media
- The controller is qualified for bacteria, yeast, fungi, insect, mammalian and stem-cell cultures, so the same hardware covers microbial and cell-culture process modes.
- Gas supply is a single feed with maximum flow rates up to 20 SLPM; the 7-inch user interface provides local control and two communication interfaces are available for external integration.
- The unit is not a validated system (validatable: no), so it is positioned for development and scale-up work rather than cGMP production.
Installation and operation
- Power is single-phase 100–120/208–240 V ±10 %, 50/60 Hz, 10 A, via IEC-C14 inlet with regional plug types.
- Water supply for cooling connects via quick-connect at 10 psig (0.69 barg).
- The brochure digest provides no further control-loop, alarm or sequence detail; operating specifics beyond the interface and communication count are not documented in the supplied facts.
Integration & Operating Notes
Exhaust condensation uses either a water-cooled condenser or an electric heater band. When the water-cooled option is fitted, the supply must be connected by quick-connect at 10 psig (0.69 barg); insufficient pressure or flow will compromise condenser performance and exhaust handling.
Maximum gas flow rates reach 20 SLPM from a single gas supply. When specifying spargers, mass flow controllers or overlay lines, sum all gas consumers against this ceiling; exceeding it will starve at least one gas path and invalidate the intended aeration strategy.
The controller exposes two communication interfaces alongside the 7-inch user interface. Plan supervisory control or data logging around these two ports; the supplied facts do not specify protocol or connector type, so confirm compatibility with the site's SCADA or DAS before purchase.
Selection & Integration Q&A
Choose it for single-unit benchtop work spanning 250 mL to 40 L via interchangeable glass (1–10 L) and BioBLU single-use vessels up to 50 L. It is not validatable, so select a validated platform for cGMP production or when parallel runs are required.
A single-phase 100–120/208–240 V ±10 %, 50/60 Hz, 10 A circuit via IEC-C14 with the correct regional plug, a gas supply sized to 20 SLPM maximum, and a 10 psig (0.69 barg) water quick-connect if the water-cooled condenser is used.
Vessels are not part of the controller: glass 1–10 L autoclavable vessels or BioBLU single-use bags must be ordered separately, as must the water-cooled condenser or electric heater band option. The supplied facts list no service intervals or consumable schedule; obtain these from Eppendorf.