Eppendorf Centrifuge 5420 - Centrifuge for Eppendorf tubes
Eppendorf Centrifuge 5420 - Centrifuge for Eppendorf tubes — Centrifuges.
The Centrifuge 5420 is a non-refrigerated benchtop centrifuge with a 24 × 1.5/2.0 mL fixed-angle rotor capacity, reaching 21,300 × g at 15,060 rpm. It is distinguished within its series by a compact 24 × 35 × 22 cm footprint and a 10-ramp soft-brake system. It is intended for routine pelleting and spin-down of microvolume samples in molecular biology workflows.
Full specifications
| Acceleration Time 1) | 15 s |
| Deceleration Time 1) | 15 s |
| Dimensions (w × D × H) | 24 x 35 x 22 cm |
| Max. Rcf | 21300 g |
| Max. Rcf With Fixed-angle Rotor | 21300 g |
| Rotational speed | 100...15060 rpm |
| Soft Brake Function | 10 ramps |
| Timer | 10 s to 9:59 h |
| Rotors available mfr | 2 |
| Max. capacity mfr | 24 × 1.5/2.0 mL |
| Height (with Open Lid) | 44 cm |
| Product Weight | 13 kg |
| Max. Power Consumption | 290 W |
| Voltage | 230 V |
| Power Plug | power plug type F |
| Cooling | non-refrigerated |
| Noise level | 56 dB |
Description
Construction and positioning
- The 5420 is a non-refrigerated, keypad-controlled unit measuring 24 × 35 × 22 cm (W × D × H) and weighing 13 kg; with the lid open it stands 44 cm tall.
- It accepts two rotor types: the aerosol-tight FA-24x2 (24 × 1.5/2.0 mL) and the F-32x0.2-PCR (32 × 0.2 mL PCR tubes or 4 × PCR strips). Adapters extend capacity to 0.4 mL, 0.5 mL/microtainer and 0.2 mL PCR tubes.
- Two ordering variants exist: without rotor (5420 000 318) and with the aerosol-tight FA-24x2 rotor included (5420 000 113).
Performance and control
- Rotational speed is adjustable from 100 to 15,060 rpm, producing a maximum RCF of 21,300 × g with the fixed-angle rotor.
- Acceleration and deceleration each take 15 s; the soft-brake function offers 10 ramps for gentle sample handling.
- The timer spans 10 s to 9:59 h and includes a continuous-run function.
Electrical and installation
- The unit operates on 230 V, 50–60 Hz with a type F power plug and a 290 W motor.
- Noise level is 56 dB during operation.
- No cooling is provided; ambient temperature and ventilation clearance must be respected per the manual.
Integration & Operating Notes
The 5420 is wired for 230 V/50–60 Hz and ships with a type F (Schuko) plug. Installations in regions with type A/B/G/I outlets need a compatible adapter or receptacle change; verify circuit capacity for the 290 W motor.
With the lid fully open the unit reaches 44 cm, so bench or shelf spacing must accommodate this to avoid obstructing lid travel. Blocking the lid can prevent proper locking and centrifugation.
Because the 5420 has no cooling, rotor chamber temperature rises during long runs. For temperature-sensitive assays, limit run duration or pre-cool rotors; otherwise use a refrigerated model from the series.
The FA-24x2 rotor is supplied aerosol-tight; its lid seal and rotor cavities should be checked for cracks or residue per the manual to maintain containment. Replace seals as recommended.
Selection & Integration Q&A
Pick the 5420 for ambient-temperature spins of 1.5/2.0 mL or PCR tubes where cooling is unnecessary. Choose a refrigerated sibling when working with heat-labile samples or long runs that would warm the chamber.
Use the F-32x0.2-PCR rotor, which holds 32 × 0.2 mL PCR tubes or 4 × PCR strips. For 0.4 mL or 0.5 mL tubes, add the corresponding adapters in the FA-24x2 rotor.
Variant 5420 000 318 ships without a rotor; order the FA-24x2 or F-32x0.2-PCR rotor separately. Variant 5420 000 113 includes the aerosol-tight FA-24x2. Adapters for 0.4/0.5/0.2 mL tubes are separate accessories.