Eppendorf Centrifuge 5804/ 5804 R - Medium-throughput, High Versatility
Eppendorf Centrifuge 5804/ 5804 R - Medium-throughput, High Versatility — Centrifuges.
The Centrifuge 5804 is the non-refrigerated benchtop member of Eppendorf's 58xx family, driven by a 900 W motor and supplied for 230 V with a type F plug. It reaches 200–14,000 rpm and 20,913 × g with fixed-angle rotors, while swing-bucket and plate rotors are limited to 4,500 × g and 2,250 × g respectively. It serves medium-throughput pelleting and plate processing where ambient-temperature runs are acceptable.
Full specifications
| Acceleration/braking Ramps | 10 |
| Blood Collection Tubes | 56 mm |
| Capacity | 4 gram |
| Conical Tubes | 40 mL |
| Dimensions (w × D × H) | 46,6 × 55,0 × 33,7 cm |
| Max. Rcf | 20913 g |
| Max. Rcf With Fixed-angle Rotor | 20913 g |
| Max. Rcf With Plate Rotor | 2250 g |
| Max. Rcf With Swing-bucket Rotor | 4500 g |
| Number Of Programs | 35 |
| Plates | 10 |
| Rotational speed | 200...14000 rpm |
| Rotor A-4-44 (4x100 Ml) | 65 dB |
| Rotor F-34-6-38 | 51 dB |
| Rotor Fa-45-6-30 (6×50 Ml) | 55 dB |
| Timer | 1 - 99 min |
| Rotors available mfr | 12 |
| Footprint (dimensions W/o Front Panel, Wxd) | 47 cm |
| Height (with Open Lid) | 74 cm |
| Product Weight | 55 kg |
| Max. Power Consumption | 900 W |
| Voltage | 230 V |
| Power Plug | power plug type F |
| Cooling | non-refrigerated |
| Noise level | 65 dB |
Description
Construction and series positioning
- The 5804 is the ambient-temperature (non-refrigerated) variant of the 58xx benchtop line; the 5804 R adds refrigeration, and the 5810/5810 R are the larger siblings. This card covers the 5804 only.
- Benchtop footprint is 46.6 × 55.0 × 33.7 cm (W × D × H), 47 cm wide without the front panel; height with the lid open is 74 cm, so bench and overhead clearance must accommodate the open lid. Unit weight is 55 kg.
- Twelve rotor types are supported across swing-bucket, fixed-angle, plate and microtube formats, giving the model its versatility within the series.
Rotor-dependent performance
- Speed range is 200–14,000 rpm. Maximum RCF is rotor-specific and must not be generalized: 20,913 × g with fixed-angle rotors, 4,500 × g with swing-bucket rotors, and 2,250 × g with plate rotors.
- Noise output also depends on the installed rotor: 65 dB with rotor A-4-44 (4 × 100 mL), 55 dB with FA-45-6-30 (6 × 50 mL), and 51 dB with F-34-6-38.
- The control system provides 10 acceleration/braking ramps and 35 program memories; the timer covers 1 to 99 min.
Drive and control
- A 900 W motor drives the rotor; the unit is configured for 230 V mains with a type F power plug.
- No digitized curve points or certificate documents were supplied with this record, so no performance curves or compliance claims are stated here.
Gaps in the supplied data
- The temperature-range field is blank and the cooling field reads "non-refrigerated"; no refrigerated operation should be assumed for this model.
- Capacity is listed as "4 gram" and conical-tube volume as 40 mL; these entries are not used to assert vessel counts or volumes beyond the rotor designations quoted above.
Integration & Operating Notes
The unit is wired for 230 V mains and terminated with a type F plug, so the bench outlet must be a compatible Schuko socket or an adapter must be provided. The 900 W motor implies supply and circuit capacity sized for the full drive load, not just standby.
Maximum RCF differs by rotor format: 20,913 × g for fixed-angle, 4,500 × g for swing-bucket, and 2,250 × g for plate rotors. Setting a speed that exceeds the installed rotor's limit risks rotor failure; the run speed must be chosen from the rotor in use, not from the instrument maximum.
The controller offers 35 program slots and 10 acceleration/braking ramps. Because ramps and stored speeds are recalled per program, each program should be verified against the rotor installed at run time; a program written for a fixed-angle rotor is not valid for a swing-bucket or plate rotor.
This model is non-refrigerated and no temperature range is specified. Heat-sensitive samples that require holding below ambient must be run on the refrigerated 5804 R sibling instead; on the 5804, run duration and sample load should be planned around warming from the 900 W drive.
Selection & Integration Q&A
Pick the 5804 when runs are at ambient temperature and 4,500 × g swing-bucket / 20,913 × g fixed-angle performance covers the protocol. Choose the 5804 R if samples must be held cold; choose the 5810/5810 R when higher capacity than the 5804's rotor set is needed.
Twelve rotor types are supported. Fixed-angle rotors reach 20,913 × g, swing-bucket rotors 4,500 × g, and plate rotors 2,250 × g. Rotors and adapters are separate items; the base unit alone does not define the achievable RCF or the vessel formats.
Rotors, buckets and adapters are separate order items, and no maintenance schedule or service-interval data was supplied in the available documents. Confirm rotor inspection intervals and spare-part lists with Eppendorf before commissioning; the base unit includes no rotor.