Eppendorf DASbox ® Mini Bioreactor System
Eppendorf DASbox ® Mini Bioreactor System — Bioreactors & fermenters.
The DASbox Mini Bioreactor System is a 4-fold parallel bioreactor platform with direct overhead drives, TMFC gas mixing, and autoclavable glass vessels of 350 mL total volume. It supports cell culture, bacteria, yeast, fungi, insect, and stem cells, with interchangeable vessels and 20–2500 rpm agitation. Designed for scale-down process development and parallel screening in bioprocess laboratories.
Full specifications
| Application | Cell culture |
| Bacteria/yeast/fungi | yes |
| Dimensions (w × D × H) | 30 x 70 x 49 cm |
| Drive | Direct overhead drives |
| Gas Supply | TMFC; overlay and/or sparger |
| Impellers | Marine |
| Insect | yes |
| Interchangeable Vessels | yes |
| Mammalian/animal | yes |
| Number Of Parallel Units | 24 unit |
| Software | DASware control, other DASware optional |
| Speed Ranges | 20...2500 rpm |
| Stem Cells | yes |
| Sterilization | Autoclavable |
| Total Volume | 350 mL |
| Validatable | no |
| Vessels | Glass vessels |
| Feed lines per vessel mfr | 2 (standard)/ 4 (optional) |
| Product Weight | 44 kg |
| Typical Weight | 44 kg |
| Typical power consumption (4-fold system without process computer) mfr | 168 W (at 230 V)/ 154 W (at 115 V) |
| User Interface | Process computer with monitor |
| Standard Gas Flow Rates | 0.04...5 |
| Standard Gas Mixing | 2 |
Description
Construction and positioning
- The DASbox is a compact 4-fold system (30 × 70 × 49 cm without process computer) that can be expanded in 4-fold increments up to 24 parallel units. Each vessel position has an independent direct overhead drive, allowing individual speed control from 20 to 2500 rpm.
- This base configuration uses autoclavable glass vessels with a total volume of 350 mL. Interchangeable vessels are supported, and the system is compatible with BioBLU 0.3 single-use bioreactors (0.3c for cell culture, 0.3f for microbiology, 0.3sc for stem cells) when single-use operation is required.
- The system is available in Cell Culture (CC) and Microbiology (MB) variants; this card describes the general DASbox Mini platform without asserting variant-specific values.
Gas supply and mixing
- Gas supply is managed by thermal mass flow controllers (TMFC) with overlay and/or sparger aeration. Standard gas flow rates range from 0.04 to 5 (units as per factory specification), and standard gas mixing supports 2 gases.
- The TMFC-based architecture provides precise, independent gas flow control per vessel, enabling defined dissolved oxygen and pH control strategies across parallel runs.
Control and operation
- The system is operated via a process computer with monitor running DASware control software; other DASware modules are optional. This centralizes data logging, setpoint management, and alarm handling for up to 24 parallel units.
- Each vessel has 2 standard feed lines, with an optional 4-line configuration for fed-batch or multi-addition protocols.
- The system is autoclavable and designed for repeated sterilization cycles; it is not a validatable system as delivered.
Integration & Operating Notes
The nominal power of 168 W applies to the 4-fold system without the process computer. When expanding to 24 parallel units, account for the cumulative power draw of all drive and control modules, and provide a dedicated circuit with appropriate overcurrent protection.
The system is operated via a process computer with monitor running DASware control. Without this computer, the bioreactor cannot be controlled or monitored. Integrate the computer into the lab network if remote access or data export is needed, and ensure uninterruptible power for the computer to prevent loss of control during runs.
Glass vessels are autoclavable; follow the manufacturer's sterilization cycle. Feed lines (2 standard, 4 optional) are consumables and should be replaced between campaigns or when clogged. The direct overhead drives require periodic inspection of bearings and seals according to the service manual.
Selection & Integration Q&A
Choose glass vessels for autoclavable, repeated use with flexible experimental design and lower consumable cost. Choose BioBLU 0.3 single-use when avoiding cleaning validation, reducing turnaround time, or working with stem cells (BioBLU 0.3sc). The DASbox platform supports both, so the decision hinges on sterilization workflow and consumable budget.
The TMFC inlets require clean, dry gas at a pressure within the controller's specified range (consult factory manual). Use appropriate tubing and fittings for the gas type (air, O2, N2, CO2). Standard gas mixing supports 2 gases; ensure each gas line is equipped with a filter and pressure regulator to protect the mass flow controllers.
Base delivery includes the 4-fold bioreactor system, glass vessels, and DASware control software on a process computer. Not included: feed lines (2 standard, 4 optional), sparger/overlay tubing, gas filters, and replacement drive seals. Autoclave glass vessels between runs; replace feed lines per protocol. No certificates are listed, so calibration may be optional.