Eppendorf DASGIP ® Bioblock/SciVario ® twin Spinner Vessels
Eppendorf ·Made in Germany · In Active Production

Eppendorf DASGIP ® Bioblock/SciVario ® twin Spinner Vessels

Eppendorf DASGIP ® Bioblock/SciVario ® twin Spinner Vessels — Bioreactors & fermenters.

The DASGIP® Bioblock/SciVario® twin Spinner Vessels are autoclavable glass vessels with a stainless steel head plate, documented in a 0.7 L size (order no. 76DS0700ODSS) within a line covering 0.7, 1 and 1.5 L vessels and 250 mL–1.5 L working volume. They serve as the culture vessel in DASGIP parallel bioreactor systems for cell culture and fermentation runs.

Full specifications

Description

Construction and series positioning

Behavior and media

Installation and operation

Integration & Operating Notes

Process Limits
Select vessel size against the 250 mL–1.5 L working-volume band

The vessel line covers 0.7 L, 1 L and 1.5 L sizes with a working volume of 250 mL to 1.5 L; the 0.7 L unit (76DS0700ODSS) is the smallest documented size. Choose the size so the intended fill sits inside the working-volume band rather than at the nominal vessel volume.

Fermentors Bioreactors Technical data DASGIP Bioblock SciVario Spinner
Maintenance
Autoclave the glass vessel and head plate as a reusable assembly

The vessel is specified as autoclavable glass with a stainless steel head plate, so cleaning and sterilization are performed by autoclaving between runs. Plan autoclave cycles and spare head-plate seals into the run schedule; no further service intervals are given in the supplied digests.

Fermentors Bioreactors Technical data DASGIP Bioblock SciVario Spinner
Control & I/O
Vessel operates inside DASGIP parallel bioreactor systems

The vessel is documented as part of the DASGIP Parallel Bioreactor Systems (4-, 8-, 16- and 24-fold, with or without Bioblock, CC and CCSU variants). Control hardware, sensor connections and drive details are system-level and are not contained in the supplied document digests.

Fermentors Bioreactors Brochure Parallel Bioreactor Systems Cell Cultu

Selection & Integration Q&A

When should I choose the 0.7 L glass twin Spinner vessel instead of the 1 L or 1.5 L sizes?

Pick the 0.7 L vessel (76DS0700ODSS) when the working volume fits the lower part of the 250 mL–1.5 L band; move to the 1 L or 1.5 L vessel when higher working volumes are needed. All are autoclavable glass with stainless steel head plates.

What system-level equipment must the vessel be paired with, and what is not included in base delivery?

The vessel is used within DASGIP Parallel Bioreactor Systems (4- to 24-fold, with or without Bioblock, CC or CCSU). The supplied digests do not list sensors, head-plate fittings, cables or drive components as part of the vessel delivery; confirm these against the system order.

What mounting and duty-cycle limits apply to this vessel?

No mounting, environment or duty-cycle limits are stated in the supplied document digests. The only confirmed handling requirement is that the glass vessel with stainless steel head plate is autoclavable; obtain installation limits from the full technical data sheet.

What maintenance and consumables should be planned for the vessel between runs?

Between runs the vessel is cleaned and autoclaved as a glass/stainless-steel assembly. The digests give no service intervals and do not specify seals, sensors or cables as included; treat these as items to verify with the system documentation.

Dimensional Drawings & Technical Documentation

Technical documentation

PDF
Fermentors Bioreactors Technical data DASGIP Bioblock SciVario Spinner
Datasheet ·203,1 КБ ·2 pp.
View PDF
PDF
Fermentors Bioreactors Brochure Parallel Bioreactor Systems Cell Cultu
Brochure ·2,3 МБ ·4 pp.
View PDF