No photo available yet
Eppendorf DASGIP ® Bioblock/SciVario ® twin Stirrer Vessels
Eppendorf DASGIP ® Bioblock/SciVario ® twin Stirrer Vessels — Bioreactors & fermenters.
The DASGIP® Bioblock/SciVario® twin Stirrer Vessel is a 1 L glass bioreactor (order no. 76SR0700ODLS) from a line spanning 1.5 L and 1.8 L vessels with a 200 mL–1.8 L working volume range. It is a stirred-tank vessel for parallel bioreactor systems, used for microbial or cell culture process development where multiple small-scale runs are executed in parallel.
Full specifications
Description
Construction and series positioning
- This modification is the 1 L vessel (order no. 76SR0700ODLS) within the DASGIP Bioblock/SciVario twin Stirrer Vessel line, which also includes 1.5 L and 1.8 L vessels.
- The line's working volume range is 200 mL to 1.8 L; the 1 L vessel therefore sits at the lower-middle of the capacity span, above the 200 mL minimum and below the 1.8 L maximum.
- The vessel is a glass stirred-tank bioreactor intended for use with DASGIP Parallel Bioreactor Systems, which are offered as 4-, 8-, 16- and 24-fold systems, with or without Bioblock, in standard (MB) and SU variants.
Behavior and media
- The brochure distinguishes glass and single-use bioreactors: the small parallel system covers 60–250 mL (glass) and 65–250 mL (single-use); the larger system covers 200 mL–1.8 L (glass) and 250 mL–1.25 L (single-use).
- The 1 L vessel falls within the larger system's glass working-volume range (200 mL–1.8 L), not the small system's range.
- No digitized curve points, matched performance specs, or certificates were supplied for this exact model; behavior under load and in different modes is therefore not characterized here.
Installation, control and operation
- The attached document digests contain no actionable engineering facts on installation, connection, control, or operation; those details must be taken from the full technical data sheet and the parallel bioreactor system manual.
- The vessel is identified as part of the DASGIP Bioblock/SciVario twin Stirrer Vessels product line; system-level integration (drive, controller, sensors) is defined by the DASGIP Parallel Bioreactor System configuration, not by the vessel alone.
Integration & Operating Notes
The 1 L vessel belongs to a line whose stated working-volume range is 200 mL–1.8 L. Ensure the intended fill volume for this 1 L vessel stays inside that line-level range; the exact minimum and maximum for the 1 L size itself are not given in the supplied facts and must be confirmed from the full technical data sheet before defining a process.
The vessel is listed under DASGIP Parallel Bioreactor Systems, which are available as 4-, 8-, 16- and 24-fold systems, with or without Bioblock, in standard (MB) and SU variants. Confirm the specific system variant and Bioblock configuration before mounting, because the supplied digests do not define mechanical interfaces for this vessel.
The brochure separates glass and single-use working volumes: the larger system covers 200 mL–1.8 L for glass and 250 mL–1.25 L for single-use. This 1 L vessel is a glass stirred-tank vessel; single-use volume figures do not apply to it.
Selection & Integration Q&A
Choose the 1 L vessel (order no. 76SR0700ODLS) when the process fits the lower-middle of the line's 200 mL–1.8 L working-volume range. The 1.5 L and 1.8 L vessels are for larger working volumes within the same range; the supplied facts do not give size-specific minimum/maximum volumes, so confirm the 1 L vessel's exact usable range before scaling down.
The vessel is part of the DASGIP Parallel Bioreactor Systems, offered as 4-, 8-, 16- and 24-fold systems, with or without Bioblock, in standard (MB) and SU variants. Match the vessel to the chosen system variant and Bioblock configuration; the supplied digests do not specify drive, sensor, or connector part numbers, so obtain those from the full system documentation.
The supplied document digests contain no actionable mounting, environment, or duty-cycle facts for this vessel. The only confirmed system-level context is that it is used in DASGIP Parallel Bioreactor Systems (4- to 24-fold, with or without Bioblock). Consult the full technical data sheet and system manual for mechanical limits and duty cycle before installation.
No maintenance intervals, service actions, or accessory lists are present in the supplied document digests. The only ordering fact given is the vessel order number 76SR0700ODLS. Spare parts, cables, sensors, and consumables are not described; request the full technical data sheet and system manual for service and accessory information.