Eppendorf epMotion ® 5073
Eppendorf ·Made in Germany · In Active Production

Eppendorf epMotion ® 5073

Eppendorf epMotion ® 5073 — Automated pipetting systems.

The epMotion 5073 is a benchtop automated pipetting system with a single module position and six SLAS/ANSI plate positions, handling 0.2–1 mL through epT.I.P.S. motion tips. Its 400 W drive runs on 100–240 V input, and the 68 × 62 × 81 cm, 86 kg frame suits a fixed laboratory bench.

Full specifications

Core Performance & Functional Specifications
Autoclavable yes
Consumables epT.I.P.S. motion tips as racks or reload
Dimensions (w × D × H) 68 x 62 x 81 cm
Heating Rate −
Operating Mode automation
Pipetting volume 0.2...1 mL
Temperature range 0...110 °C
Time Range Setting −
Max. number of modules mfr 1
SLAS/ANSI positions mfr 6
Dimensions, Weight & Mechanical Design
Product Weight 86 kg
Electrical, Power & Drive Specifications
Max. Power Consumption 400 W
Voltage 100 – 240 V
Operating Conditions, Environment & Protection
Cooling Rate 4 °C/min
Cooling Rate Above Rt −
Cooling Rate Below Rt −

Description

Construction and positioning

Behavior and media

Installation and control

Integration & Operating Notes

Process Limits
Pipetting is confined to 0.2–1 mL with epT.I.P.S. motion tips

Methods must be written within the 0.2–1 mL range and use epT.I.P.S. motion tips in rack or reload format; other tip formats are not listed as compatible. The single module position and six plate positions also cap the deck layout, so assay protocols requiring more modules cannot be configured on this model.

Factory Specification Sheet
Control & I/O
GxP operation depends on the epBlue GxP software module

The attached flyer covers the epBlue GxP software module and the epBlue ID software and hardware upgrade (order numbers 5075 002 744 and 5075 002 701). Regulated-environment users should confirm which module is required for their workflow, as the base delivery contents are not detailed in the supplied facts.

Automated Liquid Handling Flyer epMotion GxP Unquestionable
Maintenance
Autoclavable parts require a defined decontamination cycle

Autoclavable components are specified, so a routine sterilization step can be built into the laboratory's maintenance schedule. The supplied facts do not state which individual parts are autoclavable or the permitted cycle parameters, so the sterilization procedure must be taken from the instrument documentation before use.

Factory Specification Sheet

Selection & Integration Q&A

When should I choose the epMotion 5073 rather than another configuration in the epMotion line?

Choose the 5073 when the workflow fits one module position, six SLAS/ANSI plate positions and a 0.2–1 mL pipetting range. No sibling models are defined in the supplied data, so comparison against other epMotion variants must be made from Eppendorf's series documentation.

What deck and consumable requirements must adjacent system parts satisfy?

The deck provides six SLAS/ANSI positions plus one module position, and pipetting uses epT.I.P.S. motion tips in rack or reload format. Plates and tip racks must conform to SLAS/ANSI footprints; other tip formats are not listed as compatible.

What maintenance and software items are not part of the base delivery?

The epBlue GxP software module and the epBlue ID software/hardware upgrade (order numbers 5075 002 744 and 5075 002 701) are separate items per the flyer. Autoclavable parts need a defined sterilization cycle; the supplied facts do not list which parts or the cycle parameters.

Dimensional Drawings & Technical Documentation

Technical documentation

PDF
Automated Liquid Handling Flyer epMotion GxP Unquestionable
Brochure ·2,2 МБ ·4 pp.
View PDF