Eppendorf Eppendorf Research ® plus
Eppendorf Eppendorf Research ® plus — Pipettes.
The Eppendorf Research® plus is a manual, multi-channel pipette family (8-, 12-, 16-, 24-channel; Move It® variants with 4, 6, 8 channels) covering 10–1,200 μL. This card covers the Research plus line; exact channel count and volume range must be fixed at order. It is used for parallel liquid transfer in 96-/384-well workflows.
Full specifications
| Act Label | yes |
Description
Construction and positioning
- The Research® plus is the manual multi-channel member of Eppendorf's liquid-handling range, positioned below the electronic Xplorer® plus and alongside the single-button Reference® 2.
- Available channel configurations: 8, 12, 16 and 24 channels; Move It® adjustable-tip-spacing variants are offered in 4, 6 and 8 channels.
- Volume coverage across the line is 10–1,200 μL; 16- and 24-channel models are limited to 20 or 100 μL.
- The exact channel count and volume range of a given unit are configuration-dependent and must be specified at order; no single value applies to the whole line.
Behavior and media
- No digitized curve points or performance tables were supplied with the verified facts, so accuracy, precision and tip-ejection behavior cannot be quantified here.
- The line spans 10–1,200 μL; the 16-/24-channel sub-range (20 or 100 μL) is the narrow-bore, high-density format for 384-well work.
Installation, control and operation
- The attached flyer digest contains no sections or actionable engineering facts; installation, control and service specifics are therefore not documented in the supplied material and should be taken from the operating manual.
Integration & Operating Notes
The Research plus line spans 8-, 12-, 16- and 24-channel bodies and 10–1,200 μL, with 16-/24-channel units restricted to 20 or 100 μL. Specify the exact channel count and volume range before ordering, because a unit cannot be reconfigured across these sub-ranges.
The attached flyer digest contains no maintenance schedule, error codes or service intervals. Obtain the operating manual for calibration intervals, cleaning and replacement-part procedures before putting the unit into a regulated workflow.
Selection & Integration Q&A
Pick Research plus for manual multi-channel work in 8-, 12-, 16- or 24-channel format (10–1,200 μL; 16-/24-channel only 20 or 100 μL). Choose Xplorer plus when electronic dispensing/mixing modes are needed, and Reference 2 for single-button 8-/12-channel operation.
Tips must match the channel format and the unit's volume range; 16-/24-channel bodies are limited to 20 or 100 μL, so tip selection is constrained accordingly. Move It variants accept adjustable spacing. No drive, power supply or controller is required for these manual pipettes.
The supplied flyer digest contains no environmental, duty-cycle or mounting specifications. Consult the operating manual for ambient conditions and continuous-use limits before placing the unit in a workflow; no values can be stated from the verified facts.
The flyer digest lists no maintenance schedule, calibration interval, spare parts or included accessories. Tips, tip boxes and calibration service are not documented as part of base delivery; confirm the scope of supply and service plan with the operating manual and order documents.