Eppendorf Multipette ® M4 - Repeating Pipette
Eppendorf ·Made in Germany · In Active Production

Eppendorf Multipette ® M4 - Repeating Pipette

Eppendorf Multipette ® M4 - Repeating Pipette — Pipettes.

The Multipette M4 is a single-channel, mechanically operated repeating pipette using positive displacement with Combitips advanced or ViscoTip consumables, covering a pipetting volume range of 1 to 10 mL. It is a closed system that accepts only Eppendorf consumables, and it is not autoclavable. Its primary purpose is repetitive dispensing of liquids in laboratory workflows where a mechanical hand tool is preferred over an electronic pipette.

Full specifications

Core Performance & Functional Specifications
Act Label yes
Autoclavable no
Consumables Combitips ® advanced, ViscoTip ®
Delivery Content 2
Open System (third Party Consumables) no
Operating Mode mechanical
Pipetting Type Positive displacement system
Pipetting volume 1...10 mL
Random Measurement Error see Combitips advanced
Systematic Measurement Error see Combitips advanced
Dimensions, Weight & Mechanical Design
Number Of Channels 1
Product Weight 105 g
Electrical, Power & Drive Specifications
Battery Type Button cell

Description

Construction and positioning

Behavior and media

Installation, control and operation

Integration & Operating Notes

Process Limits
Consumable choice fixes the dispensed volume and accuracy

The pipette has no independent volume setting in the supplied facts; the 1–10 mL range is realized through the attached Combitips advanced or ViscoTip tip. Systematic and random error are referenced to the Combitips advanced specification, so the tip lot and size must be selected and documented as part of the method.

Factory Specification Sheet
Maintenance
Do not autoclave the pipette body

The unit is marked not autoclavable. Sterilization of the instrument itself is therefore excluded; decontamination must be done by wiping or by using the appropriate purity-grade consumable, and any protocol requiring autoclaved hardware must use a different pipette.

Factory Specification Sheet
Process Limits
Closed system: third-party tips are not supported

The open-system flag is 'no', so only Eppendorf Combitips advanced and ViscoTip consumables are specified. Attempting to fit other dispenser tips risks incorrect seating, volume error, or leakage, and voids the consumable-referenced accuracy data.

Factory Specification Sheet

Selection & Integration Q&A

When should I choose the Multipette M4 instead of another Multipette variant?

Choose the M4 when a mechanical, button-cell-assisted repeating pipette with positive displacement and 1–10 mL Combitips advanced/ViscoTip coverage is wanted. No sibling models were supplied, so comparison to electronic Multipette variants cannot be made from these facts.

What consumables and adjacent parts must be ordered with the M4?

Only Eppendorf Combitips advanced or ViscoTip tips are supported (closed system). The delivery content is listed as 2, but the facts do not specify which items; confirm the exact scope with the supplier before assuming tips or a stand are included.

Can the M4 be autoclaved or used in a sterile protocol?

No. The pipette is marked not autoclavable. Sterility must come from the purity grade of the Combitips advanced consumable (e.g., PCR clean, Biopur) rather than from autoclaving the instrument.

Dimensional Drawings & Technical Documentation

Technical documentation

PDF
Consumables Brochure Combitips advanced 360 Evolution
Brochure ·2,4 МБ ·6 pp.
View PDF