Nabertherm GFM 420
Nabertherm GFM 420 — Fusing furnaces.
The GFM 420 is a 3-phase, 18 kW fusing furnace with a movable table and a 1660 × 950 × 400 mm inner chamber, rated to 950 °C. Its 630 kg frame and 2230 × 1390 × 1460 mm outer envelope distinguish it as a floor-standing unit for loading heavy glass or metal batches onto the table outside the heated zone.
Full specifications
| Electrical connection | 3-phase |
| Nominal power | 18 kW |
| Floor space mfr | 1.57 |
| Inner dimensions (W × D × H) mfr | 1660 × 950 × 400 mm |
| Outer dimensions (W × D × H) mfr | 2230 × 1390 × 1460 mm |
| Weight | 630 kg |
| Max temperature | 950 °C |
Description
Construction and positioning
- The GFM 420 is a movable-table fusing furnace: the workload sits on a table that travels into the heated chamber, allowing loading and unloading outside the hot zone.
- Inner chamber dimensions of 1660 × 950 × 400 mm (W × D × H) give a wide, shallow working volume suited to flat or tray-based batches.
- Outer dimensions of 2230 × 1390 × 1460 mm and a weight of 630 kg require a dedicated floor position with 1.57 m² of floor space.
- The 18 kW, 3-phase electrical connection and 950 °C maximum temperature define the thermal capacity of this modification; no sibling models are listed for direct comparison.
Behavior and process role
- The 950 °C ceiling covers glass fusing and similar softening or melting processes that stay below the chamber limit.
- No digitized curve points are available for this model, so heat-up and uniformity behavior cannot be quantified from the supplied facts.
- The movable table separates the loading position from the heated chamber, which matters when batches are heavy or when the table must be loaded with cold tooling.
Control and documentation
- The attached controller document covers the Nabertherm 500 series and MyNabertherm app, including process data storage and temperature uniformity instrumentation types; it does not print model-specific settings for the GFM 420.
- The remaining attached digests (fiber optics, foundry, dental) describe other product lines and contain no GFM 420 installation or operating facts.
Integration & Operating Notes
The furnace is specified as a 3-phase, 18 kW unit. The site supply, cable cross-section and protective device must be sized for the full connected load before installation; the exact voltage and current are not stated in the supplied facts and must be taken from the nameplate.
The 2230 × 1390 × 1460 mm outer envelope and 1.57 m² floor space cover the furnace body, but the movable table needs clear access in front of the chamber for loading and unloading. Plan the floor layout so the table path is unobstructed.
The maximum temperature is 950 °C. Processes that require higher temperatures, or loads that would push the chamber beyond this limit, are outside the GFM 420's rating and risk damage to the furnace and invalid results.
The controller digest covers the 500 series and MyNabertherm app, including process data storage and temperature uniformity instrumentation types, but it does not list GFM 420-specific parameters. Controller configuration must be confirmed against the furnace order documentation.
Selection & Integration Q&A
Choose the GFM 420 when the batch fits its 1660 × 950 × 400 mm chamber and stays at or below 950 °C, and when a movable table is needed to load heavy work outside the heated zone. No sibling models are listed, so compare chamber size and power against other series.
The furnace is a 3-phase, 18 kW unit. The site must provide a 3-phase supply sized for the full connected load, with cable and protective devices matched to the nameplate voltage and current, which are not stated in the supplied facts.
The supplied documents contain no maintenance schedule, service intervals or accessory list for the GFM 420. The controller digest covers the 500 series and MyNabertherm app but does not specify included cables or consumables; these must be confirmed with the order documentation.