Nabertherm LH 120/13 DB
Nabertherm LH 120/13 DB — Laboratory.
The LH 120/13 DB is a 120-litre compact chamber furnace with a 500 × 500 × 500 mm chamber, rated to 1300 °C and 24.5 kW on a 3-phase supply, configured for debinding and sintering in air or under protective gas. It is the mid-size DB modification of the LH series, distinguished by its 120-litre working volume and dedicated process-atmosphere capability for laboratory and pilot-scale thermal processing.
Full specifications
| Chamber volume | 120 l |
| Electrical connection | 3-phase |
| Nominal power | 24.5 kW |
| Inner dimensions (W × D × H) mfr | 500 × 500 × 500 mm |
| Outer dimensions (W × D × H) mfr | 930 × 1220 × 2090 mm |
| Weight | 625 kg |
| Max temperature | 1300 °C |
Description
Construction and series positioning
The LH 120/13 DB is a floor-standing chamber furnace with a 120 l working volume (500 × 500 × 500 mm inner dimensions) and an outer envelope of 930 × 1220 × 2090 mm at 625 kg. Its 1300 °C maximum temperature and 24.5 kW three-phase connection place it in the larger-capacity end of the LH .. DB debinding/sintering line; the DB designation denotes the process variant intended for binder removal and sintering in air or under protective gas rather than general-purpose chamber work.
Thermal behaviour and process role
No digitized heating curves were supplied for this model, so cooldown and heating-rate behaviour must be taken from the operating manual rather than inferred. The 1300 °C ceiling supports both the debinding stage and the subsequent sintering stage in one chamber, which is the reason the DB variant exists: the process atmosphere and the exhaust path for binder vapours are part of the furnace architecture, not an add-on.
Control and documentation context
The attached controller documentation covers the Nabertherm 500-series controllers and the MyNabertherm app, including process-data storage and AMS2750F instrumentation types; it does not print furnace-specific settings. The remaining attached catalogues (fiber-optics glass, foundry, dental) describe other product lines and contain no LH 120/13 DB data — they should not be used to derive settings for this furnace.
Integration & Operating Notes
The attached process-control document describes the 500-series controllers and MyNabertherm app, including process-data storage and AMS2750F instrumentation types, but prints no LH 120/13 DB-specific parameters. Obtain the furnace-specific programme and thermocouple configuration from the order documentation before writing recipes; do not copy settings from the fiber-optics, foundry or dental catalogues.
Selection & Integration Q&A
Pick the 120 l unit when your batch fits the 500 × 500 × 500 mm chamber and the process needs the full 1300 °C for sintering after debinding. A smaller DB chamber is appropriate only when the load and gas consumption are proportionally lower; a larger one only when the 24.5 kW three-phase supply and floor space are available.
A dedicated three-phase supply rated for the 24.5 kW load, plus a protective-gas feed and an exhaust path for binder vapours sized for the debinding stage. The furnace is a 625 kg floor-standing cabinet, so route gas and exhaust before final positioning; controller and thermocouple configuration come from the order documentation, not the generic controller brochure.
The supplied documents do not list a maintenance schedule or included accessories for this model. Protective-gas supply hardware, exhaust ducting and any recorder or AMS2750F instrumentation are separate items; the controller brochure describes these options but does not confirm what ships with the LH 120/13 DB, so confirm the scope with the order.