Nabertherm LHT 08/17 BO
Nabertherm ·Made in Germany · In Active Production

Nabertherm LHT 08/17 BO

Nabertherm LHT 08/17 BO — High-temperature furnaces.

The LHT 08/17 BO is a 6-litre high-temperature furnace with integrated catalytic post-combustion, rated to 1750 °C and powered by a 14.3 kW 3-phase connection. Its 150 × 250 × 150 mm chamber accepts up to 75 units of organic substances with a maximum evaporation rate of 1 unit, making it suited for processes requiring controlled burn-off of binders or contaminants.

Full specifications

Core Performance & Functional Specifications
Chamber volume 6 l
Electrical connection 3-phase
Nominal power 14.3 kW
Max. evaporation rate of organic substances mfr 1
Inner dimensions (W × D × H) mfr 150 × 250 × 150 mm
Outer dimensions (W × D × H) mfr 530 × 705 mm
Dimensions, Weight & Mechanical Design
Weight 90 kg
Max. loading weight of organic substances mfr 75
Operating Conditions, Environment & Protection
Max temperature 1750 °C

Description

Construction and series positioning

Process behaviour and limits

Electrical and control

Installation and operation

Integration & Operating Notes

Electrical
3-phase supply must be sized for 14.3 kW nominal power

The furnace draws 14.3 kW at full power. The electrical installation must provide a 3-phase supply capable of this load, with appropriate overcurrent protection and cable sizing. Voltage and frequency are not specified in the verified facts and must be confirmed from the nameplate or manual before connection.

Factory Specification Sheet
Process Limits
Organic load limited to 75 units and evaporation rate to 1 unit

The maximum loading weight of organic substances is 75 (unit not specified) and the maximum evaporation rate is 1 (unit not specified). Exceeding these limits may overload the catalytic post-combustion and lead to incomplete oxidation or damage. The units must be confirmed from the manual.

Factory Specification Sheet
Maintenance
Catalytic post-combustion requires periodic inspection

The integrated catalytic post-combustion is a consumable component that degrades over time, especially when processing organic substances. Regular inspection and replacement according to the manufacturer's schedule are necessary to maintain exhaust treatment efficiency. No specific interval is provided in the verified facts.

General Nabertherm documentation (inferred from BO designation

Selection & Integration Q&A

When should I choose the LHT 08/17 BO instead of a standard LHT 08/17 without post-combustion?

Choose the BO variant when processing organic substances that produce fumes or odors requiring catalytic post-combustion to meet emission limits. For clean processes without organic burn-off, a standard LHT model avoids the additional cost and maintenance of the catalyst.

What are the requirements for the electrical supply and any adjacent controller or power electronics?

The furnace requires a 3-phase supply with 14.3 kW nominal power. Voltage and frequency are not specified in the verified facts; confirm from the nameplate. A suitable disconnect and overcurrent protection must be provided. No controller details are available for this model.

What maintenance is required and what consumables or accessories are not included?

The catalytic post-combustion element requires periodic inspection and replacement. No specific interval is given in the verified facts. Consumables such as crucibles, thermocouples, and exhaust filters are not included unless ordered separately. Refer to the manual for details.

Dimensional Drawings & Technical Documentation

Technical documentation

PDF
Prozesssteuerung englisch
Brochure ·2,8 МБ ·20 pp.
View PDF
PDF
Fiber optics glass english 0
Brochure ·10,3 МБ ·97 pp.
View PDF
PDF
Foundry english
Brochure ·4,2 МБ ·52 pp.
View PDF
PDF
Dental english
Brochure ·13,1 МБ ·72 pp.
View PDF