Nabertherm N 300
Nabertherm N 300 — Chamber kilns.
The Nabertherm N 300 is a 300-litre chamber kiln heated from five sides, achieving a maximum temperature of 1300 °C with a 20 kW three-phase connection. Its 550 × 700 × 780 mm chamber distinguishes it from the larger N 440 sibling, making it the mid-size option in the series for batch firing and heat treatment where uniform five-side heating is required.
Nabertherm Chamber Kilns up to 1300 °C heated from five sides | Nabertherm Series — Model Comparison & Selection
| Model | Chamber volume, L | Weight, kg | Electrical connection | Max temperature, °C |
|---|---|---|---|---|
| N 300 Current | 300 | 450 | 3-phase | 1300 |
| N 440 | 440 | 820 | 3-phase | 1300 |
Full specifications
| Chamber volume | 300 l |
| Electrical connection | 3-phase |
| Nominal power | 20 kW |
| Inner dimensions (W × D × H) mfr | 550 × 700 × 780 mm |
| Outer dimensions (W × D × H) mfr | 870 × 1300 mm |
| Weight | 450 kg |
| Max temperature | 1300 °C |
Description
Construction and series positioning
- The N 300 is a floor-standing chamber kiln with a 300 l working volume and inner chamber dimensions of 550 mm (W) × 700 mm (D) × 780 mm (H).
- Heating is applied from five sides (all walls plus the door), which supports temperature uniformity across the load without relying on a single radiant plane.
- Within the series, the N 300 sits below the N 440 in chamber volume; it is the appropriate choice when the batch envelope fits within 550 × 700 × 780 mm and the larger N 440 would be oversized.
- The outer dimensions are 870 mm wide × 1300 mm deep (height not stated in the available data), and the unit weighs 450 kg.
Thermal and electrical behaviour
- Maximum operating temperature is 1300 °C, with a nominal connected load of 20 kW on a 3-phase supply.
- No digitized heating or cooling curve points were supplied for this model, so no rate-of-rise or controlled-cooling figures are asserted here.
- The five-side heating architecture is the defining thermal feature of this modification; the 20 kW rating is tied to the 3-phase configuration only.
Control and operation
- The attached controller documentation covers the Nabertherm 500-series controllers and the MyNabertherm app, including process data storage and temperature uniformity instrumentation per AMS2750F; these are controller-level options, not furnace-specific ratings.
- No furnace-specific manual sections on installation, connection or error codes were available in the supplied digests, so installation and control specifics are limited to the electrical connection type (3-phase) and the controller family described in the process-control document.
Integration & Operating Notes
The unit weighs 450 kg empty; the floor or support structure must carry this plus the mass of the charge and any fixturing. The 870 mm width and 1300 mm depth define the footprint, and clearance for door swing and access to the chamber opening must be reserved in front of the unit.
Selection & Integration Q&A
Choose the N 300 when the batch fits within its 550 × 700 × 780 mm chamber and 300 l volume; the N 440 is the larger sibling for bigger loads. Both share five-side heating and 1300 °C class, so the decision is driven by charge envelope and floor space, not by temperature capability.
The kiln is a 3-phase unit with 20 kW nominal power. The feeder, protective device and isolation must be sized for that connected load and for the kiln's duty cycle; no single-phase variant is stated for this model. Confirm the site voltage against the nameplate before ordering the supply.
The base unit is the furnace with its 3-phase 20 kW connection; the controller, process-data storage and AMS2750F instrumentation described in the process-control documentation are separate selections. No cables, recorder or app connectivity are stated as part of the base delivery, so specify the controller and any monitoring equipment explicitly.