Nabertherm N 440
Nabertherm ·Made in Germany · In Active Production

Nabertherm N 440

Nabertherm N 440 — Chamber kilns.

The N 440 is a 440-litre chamber kiln heated from five sides, achieving a maximum temperature of 1300 °C with a 30 kW three-phase connection. Its 600 × 750 × 1000 mm chamber distinguishes it from the smaller N 300 sibling, offering greater batch capacity for uniform high-temperature treatment. It is intended for industrial heat-treatment processes requiring precise thermal distribution across large loads.

Nabertherm Chamber Kilns up to 1300 °C heated from five sides | Nabertherm Series — Model Comparison & Selection

Model Chamber volume, LWeight, kgElectrical connectionMax temperature, °C
N 440 Current 4408203-phase1300
N 300 3004503-phase1300

Full specifications

Core Performance & Functional Specifications
Chamber volume 440 l
Electrical connection 3-phase
Nominal power 30 kW
Inner dimensions (W × D × H) mfr 600 × 750 × 1000 mm
Outer dimensions (W × D × H) mfr 1000 × 1410 mm
Dimensions, Weight & Mechanical Design
Weight 820 kg
Operating Conditions, Environment & Protection
Max temperature 1300 °C

Description

Construction and series positioning

Thermal behaviour and load considerations

Control and documentation scope

Integration & Operating Notes

Electrical
Three-phase supply must be sized for 30 kW continuous load

The N 440 draws 30 kW from a three-phase connection. Verify that the site distribution board, cable cross-section, and protective devices are rated for the full connected load plus diversity; undersized supply will cause voltage drop, contactor chatter, or nuisance tripping during heat-up.

Factory Specification Sheet
Mounting
Floor loading exceeds 800 kg — verify structural capacity

The kiln weighs 820 kg. Confirm that the installation floor or platform can safely support this concentrated load, especially in upper-floor or mezzanine installations. Allow clearance for door swing and service access; the outer width is 1000 mm.

Factory Specification Sheet
Process Limits
Maximum temperature 1300 °C — do not exceed for lining life

Operating above 1300 °C will accelerate wear of heating elements and insulation. Process recipes should include a safety margin below this limit, and over-temperature protection should be configured in the controller to trip the heating circuit if the setpoint is exceeded.

Factory Specification Sheet
Control & I/O
Controller model not fixed — confirm series 500 or equivalent

The attached controller digest describes Nabertherm series 500 and MyNabertherm app features, but the N 440 order code does not specify a controller. Clarify with the supplier whether a series 500 controller is included or must be ordered separately, and whether AMS2750F instrumentation is required for your process.

Prozesssteuerung englisch, document scope

Selection & Integration Q&A

When should I choose the N 440 over the smaller N 300 in this series?

Choose the N 440 when your batch requires up to 440 l of chamber volume (600 × 750 × 1000 mm) and you need the same 1300 °C five-side heating. The N 300 offers less capacity; select it only if the smaller chamber fits your load and a lower connected load is acceptable.

What supply and protective devices are required for the N 440?

The kiln requires a 30 kW three-phase supply. Size the feeder cable and circuit breaker for at least 30 kW continuous, and provide a local isolator. Verify that the site voltage and frequency match the nameplate; no other electrical interface details are given in the verified facts.

What maintenance and accessories are needed that are not included in the base delivery?

The verified documents do not list a maintenance schedule or included accessories. Typically, thermocouples, door seals, and heating elements are wear items; request the N 440 instruction manual and spare-parts list from Nabertherm. A controller may be optional and should be confirmed at order.

Dimensional Drawings & Technical Documentation

Technical documentation

PDF
Prozesssteuerung englisch
Brochure ·2,8 МБ ·20 pp.
View PDF
PDF
Fiber optics glass english 0
Brochure ·10,3 МБ ·97 pp.
View PDF
PDF
Foundry english
Brochure ·4,2 МБ ·52 pp.
View PDF
PDF
Dental english
Brochure ·13,1 МБ ·72 pp.
View PDF