Nabertherm NA 120/45
Nabertherm NA 120/45 — Laboratory ovens.
The NA 120/45 is a 120-litre forced-convection chamber furnace with a 450 °C maximum working temperature, heated electrically via a 3-phase connection. Within the NA series it occupies the mid-volume, mid-temperature position between the 60-litre and 250-litre siblings, and is intended for batch processes in laboratory and industrial ovens that require uniform air circulation up to 450 °C.
Full specifications
| Chamber volume | 120 l |
| Electrical connection | 3-phase |
| Heating mfr | 9 |
| Heat-up time3 mfr | 60 |
| Cool-down time3 from Tmax mfr | 90 |
| Cool-down time3 from Tmax mfr | 30 |
| Inner dimensions (W × D × H) mfr | 450 × 600 × 450 mm |
| Outer dimensions (W × D × H) mfr | 1075 × 1475 × 1500 mm |
| Weight | 280 kg |
| Max temperature | 450 °C |
Description
Construction and series positioning
- The NA 120/45 is a forced-convection chamber furnace with a 120 l chamber measuring 450 × 600 × 450 mm (W × D × H); the outer envelope is 1075 × 1475 × 1500 mm and the unit weighs 280 kg.
- It is electrically heated and connected to a 3-phase supply; the matched electrical spec records only the phase count, so no voltage or power rating is asserted here.
- Within the NA series, the 120/45 shares the 450 °C temperature class with the NA 500/45 but offers a smaller chamber; the NA 120/65 and NA 60/65 move to a higher temperature class, and the NA 250/85 combines a larger chamber with a higher maximum temperature. The 120/45 is therefore the choice when the batch fits 120 l and the process ceiling is 450 °C.
Thermal behaviour
- The maximum temperature is 450 °C. The extra factory specs list a heating value of 9 and heat-up/cool-down times of 60 s and 90 s / 30 s, but the units and conditions are not printed; these figures are therefore not interpreted as performance ratings in this card.
- No digitized curve points were supplied, so no load-dependent or media-dependent behaviour is claimed beyond the stated maximum temperature.
Control and operation
- The attached controller digest covers the Nabertherm 500-series controllers and the MyNabertherm app, including process-data storage and temperature-uniformity instrumentation per AMS2750F; it does not print furnace model sizes or ordering codes, so controller fitment for the NA 120/45 must be confirmed against the order configuration.
- The catalog digest places the NAT/NA forced-convection chamber furnaces in the up-to-900 °C class and describes LS safety technology only for TR and KTR models; no LS variant is stated for the NA 120/45.
Integration & Operating Notes
The verified electrical spec states only a 3-phase connection. The supply voltage, full-load current and recommended upstream protection are not given in the supplied facts, so the site electrical design must obtain these from the order-specific nameplate or wiring diagram before the unit is connected.
Selection & Integration Q&A
Pick the NA 120/45 when the batch fits the 120 l chamber (450 × 600 × 450 mm) and the process stays at or below 450 °C. The NA 120/65 keeps the 120 l size but moves to a higher temperature class; the NA 250/85 adds chamber volume and temperature; the NA 500/45 keeps 450 °C but enlarges the chamber.
Only the 3-phase connection type is verified. Voltage, full-load current and breaker rating are not in the supplied facts, so they must be read from the unit nameplate or order-specific wiring diagram before sizing the feed and protective devices.
Controller fitment is order-specific: the controller digest covers 500-series controllers, MyNabertherm app connectivity, process-data storage and AMS2750F instrumentation types but prints no model codes. Sensors, cables, recorders and the app link are not confirmed as base delivery and must be specified on the order.