No photo available yet

Nabertherm ·Made in Germany · In Active Production

Nabertherm NA 4000/45

Nabertherm NA 4000/45 — Forced Convection Furnaces.

The NA 4000/45 is a 4000-litre forced-convection chamber furnace with a 450 °C maximum temperature and 3-phase electrical connection. Its 1500 × 2200 × 1200 mm chamber and 6400-unit circulation distinguish it as the largest modification in the NA series, intended for bulk heat treatment where uniform air movement across large loads is required.

Nabertherm Forced Convection Chamber Furnaces from 1000 Liter electrically heated | Nabertherm Series — Model Comparison & Selection

Model Chamber volume, LMax temperature, °CElectrical connection
NA 4000/45 Current 40004503-phase
N 1500/85HA 15008503-phase

Full specifications

Core Performance & Functional Specifications
Chamber volume 4000 l
Chamber volume 4000 l
Electrical connection 3-phase
Electrical connection 3-phase
Circulation mfr 6400
Heating mfr 60
Inner dimensions (W × D × H) mfr 1500 × 2200 × 1200 mm
Outer dimensions (W × D × H) mfr 2515 × 3350 × 1870 mm
Operating Conditions, Environment & Protection
Max temperature 450 °C
Max temperature 450 °C

Description

Construction and series positioning

Behavior and media

Control and operation

Integration & Operating Notes

Electrical
Three-phase supply required; voltage and power to be confirmed

The verified facts state only '3-phase' for the electrical connection. The actual operating voltage, full-load current and recommended upstream protection are not given, so the site electrical design must be based on the unit nameplate and Nabertherm connection documentation rather than on this card.

Factory Specification Sheet
Process Limits
Do not exceed 450 °C chamber temperature

The maximum temperature is 450 °C. Operating above this limit is outside the verified specification and may damage the circulation system, heating elements or chamber insulation; the controller setpoint and over-temperature protection should be configured so that 450 °C cannot be exceeded in normal operation.

Factory Specification Sheet
Control & I/O
Controller functions documented separately from furnace data

The controller digest describes the 500 series and MyNabertherm app, including process data storage and AMS2750F instrumentation types, but contains no furnace-model-specific parameters. Control configuration and any recorder or instrumentation options must be selected from the controller documentation and confirmed for the NA 4000/45.

Prozesssteuerung englisch

Selection & Integration Q&A

When should I choose the NA 4000/45 rather than the NA 1500/45 or N 1500/85HA?

Choose the NA 4000/45 when the load requires the 4000-litre chamber (1500 × 2200 × 1200 mm) at up to 450 °C. The NA 1500/45 offers a smaller 1500-litre chamber at the same temperature class; the N 1500/85HA belongs to a higher temperature class (85 in the model code) and should be selected when 450 °C is insufficient.

What electrical supply and upstream protection does the NA 4000/45 need?

The verified facts specify only a 3-phase connection. Voltage, full-load current and protective device ratings are not stated, so the supply and upstream protection must be sized from the unit nameplate and Nabertherm connection documentation before installation.

What installation clearances and ambient conditions apply to the NA 4000/45?

The outer envelope is 2515 × 3350 × 1870 mm. The supplied documents do not state required clearances, floor loading or ambient temperature limits for this model; these must be taken from Nabertherm installation instructions, and the site layout should reserve access for door swing and loading.

What maintenance and accessories are required beyond the base furnace?

The supplied document digests contain no maintenance schedule or consumables list for the NA 4000/45. Controller options such as the 500 series or MyNabertherm app and any recorder or AMS2750F instrumentation are separate selections described in the controller documentation, not included in the base furnace facts.

Dimensional Drawings & Technical Documentation

Technical documentation

PDF
Prozesssteuerung englisch
Brochure ·2,8 МБ ·20 pp.
View PDF
PDF
Fiber optics glass english 0
Brochure ·10,3 МБ ·97 pp.
View PDF
PDF
Foundry english
Brochure ·4,2 МБ ·52 pp.
View PDF
PDF
Dental english
Brochure ·13,1 МБ ·72 pp.
View PDF