Nabertherm SAL 30/.. - SAL 120/..
Nabertherm SAL 30/.. - SAL 120/.. — Processes Under Protective.
The SAL 30/.. - SAL 120/.. is a charging aid (Beschickungshilfe) for Nabertherm protective-atmosphere furnaces, not a furnace itself. It is a 2400 mm tall manual loading device that positions workpieces into the furnace chamber without breaking the gas seal. It serves as the interface between the operator and the hot zone in processes under protective gas.
Full specifications
| Total height in mm mfr | 2400 |
Description
Construction and positioning
- The SAL 30/.. - SAL 120/.. is a charging aid, a mechanical accessory for Nabertherm furnaces in the SAL series (protective-atmosphere operation).
- It is not a standalone furnace and has no heating, control, or gas-handling functions of its own.
- Total height is 2400 mm, indicating a floor-standing vertical loading device.
- No electrical, performance, or process-media specifications are provided for this model; it is a purely mechanical handling aid.
Behavior and use
- The device is intended to support manual charging of workpieces into the furnace chamber while maintaining the protective-gas atmosphere.
- No curve points, load ratings, or operating ranges are available; the only verified dimensional fact is the 2400 mm total height.
- Because the model code spans SAL 30/.. to SAL 120/.., it is a family of charging aids matched to different furnace sizes within the SAL series.
Installation and operation
- The attached document digests do not contain specific installation, connection, or control details for this charging aid.
- The controller and process-control documents refer to Nabertherm controller series 500 and the MyNabertherm app, but these are furnace controls, not part of the charging aid.
- No certificates, applications, or sibling models are listed for this model.
Integration & Operating Notes
The model code covers SAL 30/.. through SAL 120/.. furnaces. Confirm that the charging aid matches the specific furnace chamber dimensions and loading opening; using it with an unmatched furnace size may prevent proper positioning and compromise the protective-gas seal.
No maintenance schedule is provided in the available documents. As a mechanical handling device, check guides, joints, and contact surfaces for wear and alignment before each production campaign to avoid damage to the furnace chamber or seal.
Selection & Integration Q&A
Choose the variant whose code range covers your furnace size (SAL 30/.. to SAL 120/..). The aid must match the furnace chamber and loading opening; a mismatched size will not position workpieces correctly and may disturb the protective-gas seal.
The charging aid interfaces mechanically with the SAL furnace loading opening. No electrical, gas, or control connections are specified for the aid itself. Confirm the furnace's protective-gas supply and controller (e.g., series 500) are independent of the aid.
No maintenance schedule or included accessories are listed. The charging aid is a mechanical device; inspect for wear before each campaign. Any gloves, tongs, or workpiece fixtures for loading are not part of the base delivery and must be sourced separately.