Shimadzu Animal Balances
Shimadzu Animal Balances — Laboratory balances.
The Shimadzu Animal Balances are a specialized category of laboratory balances designed for weighing live animals, typically featuring a draft shield or cage and anti-vibration measures. This model is distinguished within the Shimadzu line by its dedicated configuration for animal weighing, prioritizing stability and containment over standard analytical performance. It serves as the primary mass measurement instrument in vivarium and animal research workflows, where live subject mass is a critical experimental variable.
Full specifications
Description
Construction and Positioning
- The Animal Balances category encompasses balances built with a pan or platform adapted to hold live animals, often with a removable enclosure to minimize stress and prevent escape.
- Unlike standard analytical or precision balances, these models prioritize animal containment and stability under dynamic load, with firmware or filtering optimized for moving subjects.
- No specific model code or series siblings are provided; this card describes the general category as represented by Shimadzu's animal balance offerings.
Behavior Under Load
- Live animal weighing introduces continuous mass fluctuations due to movement; the balance's response is typically smoothed via adjustable averaging or animal-specific weighing modes.
- Without digitized curve points or verified performance specs, no further quantitative behavior can be stated.
Installation and Operation
- Installation requires a stable, level surface free from drafts and vibrations; the animal enclosure must be correctly seated on the pan.
- Connection and control specifics are not available from the provided document digests; refer to the manufacturer's manual for electrical and interface details.
Integration & Operating Notes
Animal activity and room air currents can disturb weighing; locate the balance on a vibration-isolated bench, close doors and avoid HVAC vents to maintain repeatability.
The animal enclosure or draft shield must be used to prevent subjects from leaving the pan and to reduce air currents; ensure the enclosure is compatible with the animal size and does not contact the pan edges.
Residues from animals or bedding can affect accuracy; remove the enclosure and pan for cleaning according to the manual, and avoid solvents that may damage surfaces.
Selection & Integration Q&A
Choose animal balances when weighing live, moving subjects: they offer enclosures to contain animals and filtering to stabilize readings. Standard analytical balances lack these features and may be unsuitable for dynamic loads.
Connection requirements depend on the specific model's interfaces; typically RS-232C or USB is available. Verify the interface type and cable pinout in the manual before connecting to a PC or printer.
Operate in a stable room with minimal temperature fluctuation, away from drafts and vibrations. Avoid direct sunlight and strong air currents; allow the balance to acclimate after moving.
Regular cleaning of the animal enclosure and pan is required. Calibration weights and replacement enclosures may be needed; check the manual for approved accessories and service intervals.