Shimadzu Autograph Precision Universal Tester
Shimadzu ·Made in Japan · In Active Production

Shimadzu Autograph Precision Universal Tester

Shimadzu Autograph Precision Universal Tester — Testing machines.

The Shimadzu Autograph Precision Universal Tester is a precision universal testing machine for tensile, compression, and bending tests. No verified specifications, curve data, or manual digests are available for this model, so no working range or series positioning can be stated. It serves as the load-frame element in a materials-testing system, but integration details require confirmation from Shimadzu documentation.

Full specifications

Description

Construction and positioning

Behavior under load and media

Installation, connection, and control

Integration & Operating Notes

Process Limits
Do not operate without verified load and speed ratings

No verified maximum force, speed, or travel specifications are available for this model. Exceeding an unknown load capacity risks permanent damage to the load cell and frame; obtain the rated capacity and speed envelope from Shimadzu before any test run.

Factory Specification Sheet (not provided
Electrical
Supply and grounding requirements are undocumented

The required voltage, phase, current, and grounding scheme are not stated in the available facts. Confirm these from the nameplate and manual before connecting to facility power, and ensure protective earth is bonded per local electrical code.

Instruction Manual, Electrical Connection (not provided
Control & I/O
Define safe-stop logic before automated testing

No controller or I/O specifications were supplied. If the tester is integrated into an automated sequence, implement independent over-force and over-travel interlocks that remove drive power, because the built-in limits and their signal behavior are unknown.

Instruction Manual, Control and Safety (not provided
Maintenance
Establish a calibration and inspection schedule from the manual

No maintenance intervals, calibration procedures, or consumable part numbers are available. Before putting the machine into service, obtain the recommended calibration interval, load-cell verification method, and lubrication points from Shimadzu service documentation.

Maintenance Manual (not provided

Selection & Integration Q&A

When should I choose this Autograph Precision Universal Tester rather than another variant in the series?

No sibling-model data or specifications were provided, so a comparison cannot be made. Selection between Autograph variants depends on required force capacity, speed range, and frame stiffness; request the Shimadzu series catalog to compare models.

What adjacent system components (grips, load cell, controller, power supply) are required for this tester?

The compatible load-cell capacity, grip types, controller model, and power-supply rating are not documented in the available facts. Confirm the interface and accessory list with Shimadzu before ordering mating fixtures or drives.

What mounting and environmental conditions does the manual require for this tester?

No manual digests were supplied, so floor loading, leveling tolerances, ambient temperature, humidity, and vibration limits are unknown. Obtain the installation section of the Shimadzu manual before siting the machine.

What maintenance, calibration, and consumables are needed, and what is not included in the base delivery?

Calibration interval, load-cell verification, lubrication schedule, and consumable part numbers are not available. The base delivery contents are also undocumented; request the packing list and service schedule from Shimadzu.

Dimensional Drawings & Technical Documentation

Technical documentation