Shimadzu Brevis GC 2050
Shimadzu Brevis GC 2050 — Chromatographs.
The Brevis GC 2050 is a Shimadzu gas chromatograph designed for modular sampling and detection, with a usable temperature range of +10 to 450 °C using MMI cooling. It distinguishes itself within the Brevis series by supporting a variety of sample loops and accessories, making it suitable for flexible analytical workflows. Its primary purpose is to serve as a core separation and detection unit in laboratory gas chromatography systems.
Direct drop-in replacements
Full specifications
| Sample loop volume (MGS-2010 large-volume sample injection) mfr | 3 mL (MGS-2010 large-volume sample injection) |
| Sample loop volume (HS-20 series) mfr | 0.8 mL (HS-20 series) |
| Syringe volume (Syringe 221-34618) mfr | 50 uL (5pcs) (Syringe 221-34618) |
| ClickTek ferrule column size mfr | up to 0.43 mm (211-81162-01) |
| ClickTek ferrule column size mfr | 0.45 to 0.73 mm (211-81162-03) |
| SMI union ferrule range mfr | 0.4 - 0.8 mm (227-35025-03) |
| SMI union ferrule range mfr | 0.5 - 0.5 mm (227-35025-04) |
| Vent tube length mfr | 5 m |
| Press-Tight connector column range mfr | 0.25 to 0.53 mm (221-38102-92) |
| Noise level (Oil-less Type air generator, at 50/60 Hz) mfr | 55/57 dB (A) (Oil-less Type air generator, at 50/60 Hz) |
| Noise level (Oil-less, Quiet Type air generator) mfr | 47 dB (Oil-less, Quiet Type air generator) |
| Sample loop volume (MGS-2030/MGS-2010 standard loop) mfr | 1 mL (MGS-2030/MGS-2010 standard loop) |
| Sample loop volume (MGS-4 standard loop) mfr | 2 mL (MGS-4 standard loop) |
Description
Construction and Positioning
The Brevis GC 2050 is a gas chromatograph that integrates a column oven, injection port, and detector interface. Unlike sibling models such as the Nexis GC-2060 or GC-2030, the Brevis GC 2050 is positioned as a versatile platform compatible with a wide range of accessories, including the MGS-2030/2010 and HS-20 series samplers. The system supports MMI cooling with room-temperature air, enabling operation from +10 to 450 °C.
Behavior Under Load and Media
- The GC 2050 accommodates various sample loop volumes: 1 mL for MGS-2030/2010 standard loops, 3 mL for MGS-2010 large-volume injection, 2 mL for MGS-4, and 0.8 mL for HS-20 series. This flexibility allows adaptation to different sample concentration ranges.
- Noise levels depend on the air generator: 55/57 dB(A) with an oil-less type at 50/60 Hz, and 47 dB with an oil-less quiet type, indicating that generator choice affects laboratory acoustics.
Installation, Connection, and Control
- The system requires a vent tube of 5 m length for exhaust management.
- Column connections utilize ClickTek ferrules (up to 0.43 mm for 211-81162-01, 0.45–0.73 mm for 211-81162-03), Press-Tight connectors (0.25–0.53 mm for 221-38102-92), and SMI union ferrules (0.4–0.8 mm for 227-35025-03, 0.5–0.5 mm for 227-35025-04).
- A 50 µL syringe (221-34618, 5 pcs) is available for manual injections.
Integration & Operating Notes
The vent tube must be routed to a safe exhaust location to prevent accumulation of gases. The 5 m length allows flexibility in laboratory layout but requires planning to avoid kinks or blockages that could affect performance.
ClickTek and Press-Tight ferrules degrade over time; periodic replacement is necessary to maintain proper sealing. Refer to the accessories handbook for compatible part numbers and installation procedures.
Selection & Integration Q&A
Choose the Brevis GC 2050 when you need a versatile GC with MMI cooling and compatibility with a wide range of samplers like MGS and HS-20. For higher throughput or advanced detection, consider Nexis GC-2060 or GC-2030.
The GC 2050 supports various sample loop volumes: 1 mL for MGS-2030/2010 standard, 3 mL for MGS-2010 large-volume, 2 mL for MGS-4, and 0.8 mL for HS-20. Ensure the loop material and fittings are compatible with the sample and operating temperature.
The base unit does not include columns, syringes, sample loops, or air generators. A 50 µL syringe (221-34618) and various ferrules (ClickTek, Press-Tight, SMI) must be ordered separately. Regular replacement of ferrules is recommended.
Dimensional Drawings & Technical Documentation
Dimensional drawings
Click drawing to inspect vector dimensions