Shimadzu EDX-LE
Shimadzu EDX-LE — Elemental analyzers.
The Shimadzu EDX-LE is a benchtop energy-dispersive X-ray fluorescence spectrometer using a Si-PIN semiconductor detector and automatic primary filter switching (5 types + O) for RoHS/ELV screening. Its 370×320×155 mm sample chamber accommodates large parts, while the 520×650×420 mm, 60 kg housing fits standard lab benches. It serves as a dedicated screening tool for restricted elements in incoming material inspection.
Full specifications
| Detector types | Si-PIN semiconductor detector |
| Measurement principle mfr | X-ray fluorescence spectrometry |
| Measurement method mfr | Energy dispersive |
| Sample chamber size mfr | Max. W 370 mm × D 320 mm × H 155 mm mm |
| Primary filter mfr | Automatic switching between: 5 types + O |
| Dimensions of the main unit mfr | W 520 mm × D 650 mm × H 420 mm mm |
| Weight | Approx. 60 kg |
| Tube current mfr | 1 μA to 1,000 μA μA |
Description
Construction and positioning
- Benchtop EDXRF unit with a Si-PIN semiconductor detector and a primary filter wheel offering automatic selection among five filter types plus an open (O) position.
- Sample chamber dimensions (W 370 × D 320 × H 155 mm) allow direct measurement of sizable components without disassembly.
- Main unit footprint of W 520 × D 650 × H 420 mm and weight of approximately 60 kg define the bench space and floor-loading requirements.
- No sibling models are listed in the verified data; this card describes the EDX-LE standard configuration only.
Measurement behavior
- X-ray tube current is adjustable from 1 μA to 1,000 μA, giving a wide dynamic range for screening different element concentrations.
- Automatic filter switching changes the excitation spectrum without manual intervention, supporting sequential analysis of multiple elements in a single run.
- No digitized curve points are available; performance characterization must rely on factory specifications and the instrument's calibration.
Installation and operation
- The document digest references an optional additional function kit for certain elements; base delivery does not include it.
- No specific installation, connection, control, or maintenance procedures are detailed in the available digest; consult the full instruction manual for electrical and site requirements.
Integration & Operating Notes
The main unit weighs about 60 kg and rests on a footprint of 520 × 650 mm. The bench or floor must be level and rated for this concentrated load to avoid deflection or vibration that could affect detector alignment and measurement stability.
The sample chamber accepts items up to W 370 mm × D 320 mm × H 155 mm. Oversized parts cannot be measured without disassembly or reconfiguration, so incoming inspection planning must account for this envelope.
The document digest mentions an optional additional function kit for certain elements. Users requiring those elements must order the kit separately; base configuration does not include it, and installation may require service intervention.
Selection & Integration Q&A
Choose the EDX-LE for RoHS/ELV screening of restricted elements where a Si-PIN detector and 1–1,000 μA tube current suffice. For trace-level or multi-element research, a model with a higher-resolution detector or additional function kit may be needed; no sibling models are listed for direct comparison.
The sample chamber accepts up to 370×320×155 mm. No external drive, power supply, or mating flange specifications are provided in the verified facts; the unit is self-contained. Ensure the bench can support 60 kg and provide the electrical supply specified in the full manual.
No maintenance schedule is detailed in the available digest. The optional additional function kit for certain elements is not included in base delivery and must be ordered separately. Consult the instruction manual for service intervals and consumables.