Shimadzu Etocseries
Shimadzu Etocseries — TOC analyzers.
The TOC-1000e is a mercury-free TOC analyzer using a 172 nm excimer lamp and Active-Path design, achieving a detection limit of 0.1 µg/L. It is a standalone online monitor intended for continuous measurement of total organic carbon in water systems, with a maintenance-free one-year interval. The instrument supports optional vial sampling for grab samples and flexible mounting via wall or pole brackets.
Full specifications
| Detection limit | 0.1 µg/L (TOC-1000e) |
| Wavelength | 172 nm (excimer lamp) |
| Lamp type mfr | mercury-free excimer lamp (TOC-1000e) |
| Maintenance interval mfr | one-year (maintenance-free) |
| Vial sampler capacity mfr | Four 40-mL vials (Vial Sampler 638-57230-41) |
| Printer paper quantity mfr | 3 pcs (Printer Paper 078-15046-51) |
Description
Construction and positioning
- The TOC-1000e is the base model in the Etocseries, distinguished by its mercury-free 172 nm excimer lamp and Active-Path architecture, which eliminates the need for mercury lamps and associated hazardous waste.
- No sibling models are listed, so this unit represents the core configuration; options such as a vial sampler (638-57230-41) and mounting brackets are available but not included in the base delivery.
Measurement behavior
- The detection limit is 0.1 µg/L TOC, enabled by the high-energy 172 nm photon output of the excimer lamp, which directly oxidizes organic compounds without chemical additives.
- The Active-Path design likely maintains a constant path length and minimizes drift, though no curve points are provided to quantify dynamic response.
Installation and operation
- The analyzer is designed for wall or pole mounting using optional brackets, and requires connection to a sample line and power supply.
- Maintenance is limited to an annual interval, as the excimer lamp and system are maintenance-free for one year. A vial sampler option allows analysis of discrete samples (four 40-mL vials) in addition to continuous online measurement.
Integration & Operating Notes
The base unit does not include mounting hardware; a wall-mounted or pole-mounted bracket must be ordered separately to secure the analyzer in the field. Ensure the mounting surface can support the instrument weight and provide access for sample tubing and power connections.
The TOC-1000e is designed for one-year maintenance-free operation, meaning no routine lamp replacement or reagent replenishment is needed within that period. Schedule preventive service annually to verify performance and replace any consumables such as printer paper (if equipped).
The excimer lamp emits at 172 nm, which requires that the sample stream be optically transparent and free of particles that could foul the measurement cell. Pre-filtration may be necessary to avoid scattering and ensure accurate TOC readings at the 0.1 µg/L detection limit.
The analyzer requires a stable power source; refer to the instruction manual for voltage and frequency ratings. Use a dedicated circuit or line conditioner if the site has fluctuating power, as the excimer lamp and electronics are sensitive to voltage transients.
Selection & Integration Q&A
The TOC-1000e is the base configuration with a mercury-free 172 nm excimer lamp and 0.1 µg/L detection limit. Choose it for standard online TOC monitoring where mercury-free operation and annual maintenance are priorities. No sibling models are listed, so consult the series documentation for higher-end variants with additional features.
The sample must be compatible with UV oxidation at 172 nm, requiring low particle content and no UV-absorbing interferents. Use inert tubing and ensure a constant flow; the analyzer does not include a built-in sample pump, so an external pump or pressure-regulated supply is needed.
The instrument must be mounted on a wall or pole using an optional bracket, in a location protected from direct sunlight, vibration, and temperature extremes. Refer to the manual for allowable ambient temperature and humidity. The one-year maintenance-free design reduces routine intervention.
The base delivery excludes the vial sampler (638-57230-41), wall/pole mounting bracket, printer paper (078-15046-51), and conditioned standard solutions. Annual maintenance is required, but no consumables are needed within the first year. Order these accessories separately based on application needs.