No photo available yet
Shimadzu Imlayer
Shimadzu Imlayer — Life science instruments.
The Shimadzu Imlayer is a vacuum sublimation/evaporation device for matrix deposition onto a single glass slide, compatible with DHB, 9-AA, and CHCA matrices. It reaches 1×10⁻² Pa vacuum and up to 250°C, enabling controlled film formation for MALDI sample preparation. This model is the base configuration for manual slide processing in life science labs.
Full specifications
Description
Construction and positioning
- The Imlayer is a benchtop vacuum deposition unit designed for one glass slide, using resistive heating under rough vacuum to sublimate or evaporate matrix material onto the slide surface. - The vacuum chamber attains 1×10⁻² Pa, sufficient for mean free path conditions needed for uniform matrix deposition. ### Behavior under load and media
- The maximum temperature is 250°C, allowing use with DHB, 9-AA, and CHCA matrices, which have different sublimation/evaporation temperatures. - The single-slide format means one sample per run; throughput is limited by pump-down and heating cycles. - The device requires a vacuum pump (not specified) and a power supply; the vacuum level attained indicates the pump must be capable of reaching 10⁻² Pa range. - Control is likely via front-panel temperature and vacuum monitoring, but this is not confirmed by the provided facts.
Integration & Operating Notes
Operating above 250°C may degrade the matrix, damage the heater or slide, and invalidate results. The limit applies to the sample stage; ensure the temperature controller is calibrated and the setpoint does not overshoot during ramp-up.
Insufficient vacuum leads to scattering and non-uniform matrix films. Verify the pump and chamber seals can achieve this level before each run; a lower vacuum may require longer pump-down or indicate a leak.
Selection & Integration Q&A
Choose the Imlayer when you need controlled, reproducible matrix films on a single glass slide using DHB, 9-AA, or CHCA, and when vacuum sublimation/evaporation is preferred over dried-droplet or spray methods for uniformity.