Shimadzu NJ Servo Series
Shimadzu NJ Servo Series — Testing machines.
The NJ Servo Series is a servo-hydraulic dynamic testing actuator with a 5 kN force capacity and 100 mm full stroke, driven by a 3-phase 200 V servo amplifier and controlled via the Servo Controller 4830. It delivers up to 72 cm/sec unloaded velocity in single-wave mode and 50 cm/sec continuous sine, making it suited for high-cycle fatigue and dynamic characterization of components and materials.
Full specifications
| Crosshead travel | ±100 mm |
| Dynamic test force (NJ-1kNV-100) mfr | ±1 kN (NJ-1kNV-100) |
| Static test force (NJ-1kNV-100) mfr | ±1 kN (NJ-1kNV-100) |
| Dynamic test force (NJ-5kNV-100) mfr | ±5 kN (NJ-5kNV-100) |
| Static test force (NJ-5kNV-100) mfr | ±5 kN (NJ-5kNV-100) |
| Dynamic test force (NJ-10kNV-100) mfr | ±10 kN (NJ-10kNV-100) |
| Static test force (NJ-10kNV-100) mfr | ±10 kN (NJ-10kNV-100) |
| Dynamic test force (NJ-20kNV-100) mfr | ±20 kN (NJ-20kNV-100) |
| Static test force (NJ-20kNV-100) mfr | ±20 kN (NJ-20kNV-100) |
| Dynamic test force (NJ-30kNV-100) mfr | ±30 kN (NJ-30kNV-100) |
| Static test force (NJ-30kNV-100) mfr | ±30 kN (NJ-30kNV-100) |
| Test force accuracy mfr | ±0.5 % indicated value |
| Stroke accuracy mfr | ±1 % indicated value |
| Maximum speed at maximum loading mfr | 72 cm/sec (5, 10 kN) |
| L0 (NJ-1kNV-100) mfr | 980 mm (NJ-1kNV-100) |
| L1 (NJ-1kNV-100) mfr | 680 mm (NJ-1kNV-100) |
| L0 (NJ-5kNV-100) mfr | 1080 mm (NJ-5kNV-100) |
| L1 (NJ-5kNV-100) mfr | 730 mm (NJ-5kNV-100) |
| L0 (NJ-10kNV-100) mfr | 1260 mm (NJ-10kNV-100) |
| L1 (NJ-10kNV-100) mfr | 750 mm (NJ-10kNV-100) |
| L0 (NJ-20kNV-100) mfr | 1385 mm (NJ-20kNV-100) |
| L1 (NJ-20kNV-100) mfr | 840 mm (NJ-20kNV-100) |
| L0 (NJ-30kNV-100) mfr | 1550 mm (NJ-30kNV-100) |
| L1 (NJ-30kNV-100) mfr | 820 mm (NJ-30kNV-100) |
| Weight (NJ-1kNV-100) mfr | Approx. 30 kg (NJ-1kNV-100) |
Description
Construction and positioning
- The NJ Servo Series is a single-actuator servo-hydraulic system comprising an actuator unit (length 1080 mm) and a separate servo amplifier (700 × 715 × 552 mm). - It is a standalone dynamic actuator, not a complete testing machine; integration with a load frame, controller, and hydraulic supply is required. ### Performance and behavior
- Rated dynamic and static test force: 5 kN. - Full stroke: 100 mm; stroke accuracy: ±1 % indicated value or ±0.1 % of rating. - Test force accuracy: ±0.5 % indicated value or ±0.02 % of load cell rating, whichever is larger. - Velocity: up to 72 cm/sec unloaded in single-wave mode; 50 cm/sec continuous sine wave (unloaded). - Amplitude characteristics are provided in separate diagrams; actual force capacity depends on frequency and amplitude. ### Installation and operation
- Power requirements: 3-phase 200 V, 7 kVA for the servo amplifier; single-phase 100 V, 1.5 kVA for auxiliary controls. - Compatible controller: Servo Controller 4830. - The actuator unit and amplifier are separate, allowing flexible placement; hydraulic connections and cooling must be provided per installation manual.
Integration & Operating Notes
The servo amplifier draws 7 kVA from a 3-phase 200 V source; ensure the supply and circuit protection are sized for the amplifier's inrush current and continuous demand. Undersized supply can cause tripping or unstable actuator motion.
The actuator is designed exclusively for the Servo Controller 4830; other controllers may not provide the correct command signals, feedback scaling, or safety interlocks. Verify controller firmware and configuration match the actuator's stroke and force ratings before operation.
In continuous sine wave mode, maximum velocity is 50 cm/sec unloaded; single-wave bursts allow 72 cm/sec. Exceeding these limits under load may cause overheating or loss of force accuracy. Amplitude characteristics diagrams must be consulted for loaded conditions.
Selection & Integration Q&A
It requires the Servo Controller 4830 and a 3-phase 200 V, 7 kVA supply for the servo amplifier, plus single-phase 100 V, 1.5 kVA for auxiliary circuits. Ensure the supply can deliver the amplifier's inrush current.