Shimadzu T Series
Shimadzu T Series — Testing machines.
The Shimadzu T Series is an electric-hydraulic servo torsion testing machine using a cross-looped system for closed-loop control of torque and torsion angle. It delivers a maximum dynamic/static capacity of 0.75 kN with ±1% torque accuracy and ±50° torsion angle range. This modification is intended for precision torsion testing of components and materials requiring synchronized torque-angle control within a compact 600×1800 mm table footprint.
Full specifications
Description
Construction and positioning
- The T Series is a dedicated torsion testing frame with an electric-hydraulic servo actuator integrated into the loading frame; the actuator is included in the 830 kg frame weight. - The testing space provides flange spacing adjustable from 0 to 1000 mm, a torque center height of 300 mm, and a base stand height of 600 mm. - The table area measures 600 mm (width) × 1800 mm (length) with 18 mm nominal T-slots for fixture mounting. ### Behavior under load and control modes
- The cross-looped servo system supports two control modes: torque control and torsion angle control, allowing static and dynamic torsion tests. - Static torque accuracy is within ±1% of indicated value or ±0.05% of dynamic rating, whichever is greater; torsion angle accuracy is within ±1.5% of indicated value or ±0.15% of dynamic rating, whichever is greater. - The maximum capacity is 0.75 kN (dynamic/static), which sets the upper limit for both torque and angle control regimes. ### Installation, connection, and operation
- The system requires a separate hydraulic power supply unit, model QF-10B, which is not integrated into the frame and must be connected to the actuator.
Integration & Operating Notes
Exceeding the ±50° torsion angle limit risks damage to the actuator or specimen fixturing; the control system should be configured with software or hardware limits to prevent over-travel during angle-controlled tests.
Selection & Integration Q&A
The machine requires the QF-10B hydraulic power supply unit, which is not part of the 830 kg loading frame. Ensure the laboratory provides appropriate hydraulic connections and electrical supply for the power unit, and that the actuator is properly coupled to the frame.