No photo available yet
Shimadzu Tescan Magna
Shimadzu Tescan Magna — Microscopes.
The Tescan Magna is a ultra-high-resolution scanning electron microscope built around the Triglav™ UHR-SEM column with a Schottky field emitter and TriLens™ immersion optics. It delivers 0.5 nm resolution at 30 keV, 0.6 nm at 15 keV, and 0.9 nm at 1 keV with sample bias, covering a magnification range of 4× to 2,000,000×. The instrument is intended for nanoscale imaging in materials and life sciences using TriSE and TriBSE detection.
Full specifications
Description
Construction and positioning
- The Magna uses the Triglav™ UHR-SEM column, a three-lens architecture with TriLens™ immersion optics that places the final lens field at the sample for high-resolution performance. - The electron source is a Schottky field emitter, providing stable high-brightness beams across the accelerating voltage range. - Detection is via TriSE (secondary electron) and TriBSE (backscattered electron) detectors integrated into the column/specimen chamber. ### Behavior under load and in different modes
- Resolution is specified as 0.5 nm at 30 keV, 0.6 nm at 15 keV, and 0.9 nm at 1 keV with sample bias (BDT). This indicates that the immersion optics and beam deceleration technology maintain sub-nanometer performance even at low landing energies, which is critical for minimizing charging and beam damage on sensitive specimens. - The magnification range spans 4× to 2,000,000×, allowing both overview imaging and high-magnification nanoscale inspection without changing columns. - The use of TriSE and TriBSE detectors enables simultaneous topographic and compositional contrast, though no curve points or dynamic behavior data are provided. The instrument is a laboratory-grade electron microscope and should be installed per the manufacturer's site requirements, which are not included in the provided data.
Integration & Operating Notes
The 0.9 nm resolution at 1 keV is specified only with sample bias (beam deceleration technology). Without BDT, low-voltage performance may degrade. The operator must ensure BDT is enabled and the sample is electrically compatible when sub-nanometer imaging at low landing energies is required.