No photo available yet

Shimadzu ·Made in Japan · In Active Production

Shimadzu Tescan Mira

Shimadzu Tescan Mira — Microscopes.

The Tescan Mira is a Schottky field-emission scanning electron microscope (FEG SEM) configured for high-resolution surface and sub-surface imaging with a wide detector suite (SE, BSE, EDS, CL, Raman, STEM, EBSD, WDS). It uses Essence software with In-Flight Beam Tracing and an intermediate lens, and supports SingleVac and optional MultiVac vacuum modes. It serves as a flexible analytical platform for materials characterization where both topographic contrast and microanalysis are required.

Full specifications

Description

Construction and positioning

Integration & Operating Notes

Process Limits
Vacuum mode choice governs allowable sample types

SingleVac is standard and MultiVac is optional; the selected vacuum mode determines the permissible chamber pressure and therefore which samples (porous, outgassing, hydrated) can be imaged without contamination or pump-down delays. Confirm the installed mode before accepting a sample.

Factory Specification Sheet
Electrical
Site power and grounding must be verified before installation

FEG sources and high-voltage electronics are sensitive to supply stability and grounding quality.

Factory Specification Sheet
Control & I/O
Essence software is the single control environment

All acquisition, detector selection, and beam control are managed through Essence, including the 3D Collision Model. Detector and accessory integration must be configured within this environment, so third-party detectors require Essence-compatible interfaces.

Factory Specification Sheet
Maintenance
FEG source and vacuum maintenance follow factory intervals

The maintenance schedule in the instruction manual must be followed to avoid emission drift or chamber contamination; consumables and cables are not included in base delivery.

Instruction Manual, Maintenance Section

Selection & Integration Q&A

What adjacent system components must be compatible with the Mira?

Detectors and accessories (EDS, EBSD, WDS, Raman, CL, STEM) must be Essence-compatible and mechanically fit the available ports. Site power, cooling, and grounding must meet the site-preparation manual; no controller or drive details are given, so integration is planned at the system level.

Dimensional Drawings & Technical Documentation

Technical documentation