Shimadzu Tescan Nanospace
Shimadzu ·Made in Japan · In Active Production

Shimadzu Tescan Nanospace

Shimadzu Tescan Nanospace — Microscopes.

The Tescan Nanospace is a UHV-compatible FIB-SEM platform configurable as a multi FIB-SEM, dual FIB-FIB, mono-beam FIB, or stand-alone SEM, built around a 6-axis stage and a Secondary Electron Detector. Its ultra-high vacuum design and UHV-compatible GIS enable local metal deposition and selective etching directly in the analysis chamber. The system is intended for integration with third-party UHV infrastructure such as MBE clusters, APT chambers, and synchrotron beamlines, where correlated FIB-SEM analysis under UHV is required.

Full specifications

Description

Construction and configuration

Integration & Operating Notes

Process Limits
UHV operation is mandatory for all configurations

The Nanospace is specified as an ultra-high vacuum instrument; operating the column, stage, or GIS outside UHV conditions is outside the stated design basis and risks invalid results and contamination of the UHV chamber. Vacuum performance of the host system must be verified before integration.

Factory Specification Sheet
Mounting
Chamber interface must match third-party UHV infrastructure

Connection to MBE clusters, APT chambers, or synchrotron beamlines requires that the mating flange, vacuum level, and mechanical interface of the host be agreed with the instrument configuration; the 100 mm by 100 mm footprint and 6-axis stage define the space envelope to be reserved.

Factory Specification Sheet
Control & I/O
Column and ion-source choice is fixed at order

The electron column (fully electrostatic or electromagnetic) and the FIB ion source (LMAIS, gas plasma, Wien-filtered LMAIS, or Wien-filtered gas plasma) are configuration options; the control architecture and operating modes follow from this selection, so the choice must be made before integration planning.

Factory Specification Sheet
Maintenance
GIS chemistry must be UHV-compatible

Only UHV-compatible GIS precursors for local metal deposition and selective etching are within the stated capability; introducing non-compatible chemistries would compromise the UHV environment and the analysis conditions of the chamber.

Factory Specification Sheet

Selection & Integration Q&A

When should I choose the Nanospace multi FIB-SEM configuration rather than a mono-beam FIB or stand-alone SEM?

Choose multi FIB-SEM when the workflow needs combined electron and ion beam operation in one UHV chamber; mono-beam FIB or stand-alone SEM configurations suit single-beam tasks. Dual FIB-FIB is for two ion beams. The configuration is fixed at order, so define the beam requirement first.

What must be verified on the host vacuum system before connecting the Nanospace to an MBE cluster or APT chamber?

The host must provide a UHV-compatible interface matching the Nanospace chamber, since the instrument is specified for ultra-high vacuum and third-party UHV connection. Flange geometry, pump-down protocol, and the 100 mm by 100 mm envelope with 6-axis stage travel must be agreed before installation.

Which ion source and electron column options affect integration and operation of this model?

The FIB source can be LMAIS, gas plasma, Wien-filtered LMAIS, or Wien-filtered gas plasma, and the electron column fully electrostatic or electromagnetic. These are order-time choices that determine beam behavior and control requirements; they cannot be changed after delivery.

Dimensional Drawings & Technical Documentation

Technical documentation