No photo available yet
Shimadzu Tescan Spectral Ct
Shimadzu Tescan Spectral Ct — Spectrometers.
The Tescan Spectral CT is a laboratory micro-CT system from Shimadzu that combines X-ray computed tomography with energy-dispersive spectral detection for non-destructive 3D elemental and density mapping. It is positioned as a standalone analytical instrument for materials research, not as an inline process sensor. Its primary purpose is to resolve internal microstructure and compositional gradients in samples without sectioning.
Full specifications
Description
Construction and positioning
- The system is a micro-focus X-ray CT scanner with a spectral detection chain, integrating a sealed X-ray source, a rotation stage, and an energy-resolving detector array. ### Behavior under load and in different modes
- No digitized curve points or factory performance tables were supplied, so no quantitative load, resolution, or throughput behavior can be stated here. - The spectral mode is intended to separate material phases by their X-ray attenuation signature; the CT mode provides the geometric density map. Both modes share the same mechanical scan path. ### Installation, connection, and operation
- No PDF digests were attached, so installation, connection, control, and operating specifics cannot be extracted. The notes below are limited to general integration categories and must be confirmed against the actual manual before commissioning.
Integration & Operating Notes
The maximum sample envelope, mass, and allowable density are not given in the supplied facts. Oversized or excessively dense samples can collide with the source or detector during rotation and can saturate the detector. Confirm the stage load limit and scan envelope before accepting customer samples.
Selection & Integration Q&A
The nameplate voltage, current, and phase must be confirmed against the lab supply, and a dedicated regulated circuit should be provided. The supplied facts contain no electrical ratings, so the exact supply and any UPS or isolation-transformer requirement must be obtained from Shimadzu before connection.
Source aging, detector calibration, and any filters or windows are the likely service items, but the supplied facts contain no maintenance schedule or accessory list. The preventive-maintenance plan, calibration phantoms, and any cables or sample holders must be confirmed with Shimadzu; none are documented as included.