No photo available yet

Shimadzu ·Made in Japan · In Active Production

Shimadzu Tescan Unitom Hr 2

Shimadzu Tescan Unitom Hr 2 — Spectrometers.

The Tescan Unitom HR 2 is a high-resolution X-ray computed tomography system configured as a standalone analytical instrument within the spectrometer category. Its primary purpose is non-destructive 3D inspection and metrology of internal and external structures.

Full specifications

Description

Construction and positioning

Integration & Operating Notes

Electrical
Supply and power ratings not verified for this model

No factory specification sheet or manual digest was supplied, so the required voltage, phase, current, and grounding arrangement for the Tescan Unitom HR 2 cannot be stated. The integrating engineer must obtain the site-preparation guide from Tescan before committing facility power.

No document supplied
Mounting
Floor loading and clearance requirements unknown

CT systems are sensitive to vibration and typically require a stable floor and controlled environment, but no verified weight, footprint, or clearance data exists for this model. Site survey must precede installation planning.

No document supplied
Maintenance
Service intervals and consumables not documented

No maintenance schedule, X-ray source lifetime figure, or consumable list was provided. The owner should request the planned-maintenance schedule and spare-parts list from Tescan to avoid unplanned downtime.

No document supplied

Dimensional Drawings & Technical Documentation

Technical documentation