Waters ACQUITY Premier UPLC System
Waters ·Made in USA · In Active Production

Waters ACQUITY Premier UPLC System

Waters ACQUITY Premier UPLC System — Chromatographs with Flow rate 2 milliliter/minute, Max pressure 103.4 megapascal.

The ACQUITY Premier UPLC System is a binary or quaternary high-pressure liquid chromatograph with a flow-through needle injector and inert MaxPeak HPS sample path, rated to 15,000 psi and 2.0 mL/min. It distinguishes itself within the ACQUITY series by combining active solvent pre-heating, sub-0.002% carryover, and eCord column tracking in a single 711 mm high enclosure. It serves as the separation engine in analytical workflows requiring ultra-high-pressure gradients and low-adsorption surfaces for sensitive analytes.

Flow rate
2 milliliter/minute
Max pressure
103.4 megapascal

Full specifications

Core Performance & Functional Specifications
Flow rate 2.0 mL/min
Max pressure 15000 psi
Column temperature 40 C
Injection type mfr Flow-Through Needle, Fixed Loop
Sample Flow Path mfr Inert (MaxPeak HPS Technology)
Sample Carryover mfr ≤0.002%
Sample Compartment mfr 4 to 40 C
Pump Options mfr Binary, Quaternary
Solvent Conditioning mfr Active pre-heating as standard
Column Tracking mfr eCord Technology column information management t
Column Capacity mfr Six columns up to 150 mm length, up to 4.6 mm in
Maximum Sample Capacity mfr 8,064 (with Sample Organizer)
Detector Options mfr TUV Detector, PDA eλ Detector, FLR Detector, Cha
External Control mfr Empower Software, MassLynx Software, waters_conn
Dimensions, Weight & Mechanical Design
Height 711 mm
Width 343 mm
Depth mfr 71.2 cm (28.0 in.)
Materials, Media & Process Compatibility
pH Range mfr 1 to 12.5

Description

Construction and positioning

Integration & Operating Notes

Process Limits
Do not exceed 15,000 psi or 2.0 mL/min

Operating above the pressure or flow limit risks seal failure, column damage, and invalid chromatographic results. The limit applies to the entire flow path, including the column and detector cell; ensure method gradients are validated against the system pressure ceiling.

Factory Specification Sheet
Process Limits
Mobile phase pH must stay within 1–12.5

Outside this range, the inert MaxPeak surfaces and column hardware may degrade, leading to metal leaching and compromised peak shape. Buffer selection and pH adjustment must be verified before use, especially with high-concentration salts.

Factory Specification Sheet
Control & I/O
Column tracking via eCord requires software registration

The eCord chip on each column must be read by the system and registered in Empower, MassLynx, or waters_connect to archive usage. Without registration, column history and performance data are not recorded, which may affect method transfer and compliance.

Factory Specification Sheet
Maintenance
Sample Organizer is an accessory, not base delivery

The 8,064-sample capacity requires the optional Sample Organizer; base delivery includes only the standard sample compartment. Plan for additional bench space and power connections if extended capacity is needed.

Factory Specification Sheet

Selection & Integration Q&A

When should I choose the ACQUITY Premier UPLC System over other ACQUITY variants?

Choose this model when you need inert sample paths for metal-sensitive analytes, sub-0.002% carryover, and active solvent pre-heating in a single integrated system. For lower pressure or simpler binary-only needs, other ACQUITY models may suffice.

What detector and software compatibility does the system require?

The system supports TUV, PDA eλ, FLR, charged aerosol, RI, ELS detectors, and mass spectrometers. Control is via Empower, MassLynx, or waters_connect; ensure the chosen detector and software are configured for the flow rates and pressures used.

What maintenance items and accessories are not included in the base delivery?

The Sample Organizer for 8,064-sample capacity is optional. Column tracking requires eCord-equipped columns. Routine maintenance includes pump seals, needle, and tubing; these consumables and the Sample Organizer must be ordered separately.

Dimensional Drawings & Technical Documentation

Technical documentation